StarTech.com SM2E1BMU31C Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com SM2E1BMU31C (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om StarTech.com SM2E1BMU31C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 20, 2021 3:03 PM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram (SM2E1BMU31C)

Exterior - Enclosure

ComponentFunction

1Drive-Tray Screws x 2

• Used to secure the in the Drive Tray

Enclosure.

2Power & Activity LED

• Indicates that the is receiving Enclosure

power.

• Blinks during read/write activity.

3USB-C Port

• Used to connect the to the Enclosure Host

Computer.

Interior - Drive Tray

ComponentFunction

4Drive Connector• Used to connect the to the .DriveEnclosure

5

Adjustable Drive

Length Holes

• Used to accommodate dierent drive lengths.

6

Drive-Mount Screw/

Stando/Nut

• Used to secure the to the .DriveEnclosure

M.2 SATA/NVMe SSD Enclosure - USB 3.2 (10Gbps) w/ USB-C and USB-A Cables

Package Contents

• M.2 SSD Enclosure x 1

• USB-C to USB-C Cable x 1

• USB-A to USB-C Cable x 1

• Drive Installation Screw Kit x 1

• Micro Screwdriver x 1

• Quick-Start Guide

Product Information

For the latest requirements, please visit

www.startech.com/SM2E1BMU31C

Product Requirements

• M2 SATA/NVMe SSD x 1

• 30 mm, 42 mm, or 60 mm Drive Length

• Needle-nose Pliers x 2

Installation

Installing a Drive

Warning! Handle drives with care.

1. Remove the (x 2) from the , using a Drive Tray ScrewsEnclosurePhillips Head

Screwdriver Cover Plate, and remove the.

2. Carefully pull the out of the . Drive TrayEnclosure

3. Remove the , using a .Drive-Mount ScrewPhillips Head Screwdriver

4. Place the next to the and align the screw holes in the with DriveDrive TrayDrive

the on the to determine the desired Adjustable Drive Length HolesDrive Tray

Adjustable Drive Length Hole setting.

Note: If the drive mounting hardware is already installed in the correct position,

proceed to step 8.

5. Remove the and , using two sets of Drive StandoNutNeedle-nosePliers.

6. Insert the and into the (60, 42, DriveStandoNutAdjustable Drive Length Hole

or 30) according to the length of the .Drive

7. Tighten the and , using two sets of StandoNutNeedle-nosePliers.

1

2

3

4

6

5

Produktspecifikationer