StarTech.com ST3300G3UA Bruksanvisning
StarTech.com
Nätverkskort/adapter
ST3300G3UA
Läs gratis den bruksanvisning för StarTech.com ST3300G3UA (2 sidor) i kategorin Nätverkskort/adapter. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om StarTech.com ST3300G3UA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 10/22/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ST3300G3UA.
Packaging contents
• 1 x 3-port USB 3.0 hub plus Gigabit Ethernet
• 1 x instruction manual
System requirements
• Host computer with a USB 2.0 or USB 3.0 port
• Any of the following operating systems:
• Windows® 10 (32-bit or 64-bit)
• Windows 8.1 (32-bit or 64-bit)
• Windows 8 (32-bit or 64-bit)
• Windows 7 (32-bit or 64-bit)
• Windows Server® 2008 R2
• Windows Server 2012
• Mac OS 10.7 and later (tested up to 10.11)
Note: To obtain the maximum USB throughout, you must use a
computer with a USB 3.0 port.
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/ST3300G3UA.
ST3300G3UA
3-Port USB 3.0 Hub Plus Gigabit Ethernet
*actual product may vary from photos
Product diagram
Gigabit RJ45 port USB 3.0 ports
Introduction
The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit
Ethernet adapter that is portable and lightweight. It’s equipped
with three USB 3.0 ports with throughput up to 5Gbps and is also
backward compatible, so you can use it with your USB 2.0 and earlier
devices.
USB 3.0 cable
Power LED
Link and activity LED
Gigabit RJ45 port
USB 3.0 cable
Conrm driver installation
Depending on the version of the operating system that you’re
running, when you connect the hub to your computer, the drivers
are installed automatically.
To make sure that the drivers installed properly, on a computer
running a version of Windows, do the following:
1. On your computer, navigate to Device Manager.
2. Under , check to make sure that there isn’t an Network adapters
exclamation mark next to any of the adapters.
If there is an exclamation mark next to the Realtek USB device, see
the topic for more information.Install a driver
Connect the hub to a computer
1. Connect the USB 3.0 cable on the hub to a USB port on the host
computer.
Note: For the best performance, use a computer with a USB 3.0 port.
2. Connect your Cat 5e/6 network connection to the Gigabit RJ45
port on the hub.
3. Connect up to three USB 3.0 peripherals to the hub as necessary.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Nätverkskort/adapter |
| Modell: | ST3300G3UA |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com ST3300G3UA ställ en fråga nedan och andra användare kommer att svara dig
Nätverkskort/adapter StarTech.com Manualer
15 Januari 2025
14 Januari 2025
30 December 2025
30 December 2025
29 December 2024
29 December 2024
29 December 2024
17 December 2024
23 Oktober 2024
3 Oktober 2024
Nätverkskort/adapter Manualer
- EVOLVEO
- EQ3
- Maxxter
- Buffalo
- Iconbit
- EXSYS
- Hercules
- Axis
- Dahua Technology
- Yealink
- Planet
- Intermec
- Teufel
- Gigabyte
- Klipsch
Nyaste Nätverkskort/adapter Manualer
8 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
1 April 2025
30 Mars 2025
29 Mars 2025
14 Mars 2025
14 Mars 2025