Studer XTH 8000-48 Bruksanvisning

Läs gratis den bruksanvisning för Studer XTH 8000-48 (1 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 8 recensioner. Har du en fråga om Studer XTH 8000-48 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Xtender

XTH

Data may change without any notice

* Adjustable with the RCC-02/-03

** These features are valid only when using the cooling module ECF-01.

(1)

With -01 at the end of the reference, means 120V/60Hz. Available for all Xtenders except XTH 8000-48

Model

XTH 3000-12XTH 5000-24XTH 6000-48XTH 8000-48

Inverter

Nominal battery voltage12 Vdc24 Vdc48 Vdc

Input voltage range 9.5 - 17 Vdc19 - 34 Vdc38 - 68 Vdc

Continuous power @ 25°C2500 VA4500 VA5000 VA7000 VA

Power 30 min. @ 25°C3000 VA5000 VA6000 VA8000 VA

Power 5 sec. @ 25°C7.5 kVA12 kVA15 kVA21 kVA

Maximum loadUp to short-circuit

Asymmetric loadUp to Pcont.

*Load detection (stand-by)2 to 25 W

Cos j

0.1-1

Maximum efciency93 %94 %96 %

Consumption OFF/Stand-by/ON 1.2 W / 1.4 W / 14 W1.4 W / 1.8 W / 18 W1.8 W / 2.2 W / 22 W1.8 W / 2.4 W / 30 W

*Output voltagePure sine wave 230 Vac (± 2 %) / 120 Vac

(1)

*Output frequencyAdjustable 45 - 60 Hz

(1)

± 0.05 % (crystal controlled)

Harmonic distortion< 2 %

Overload and short-circuit protectionAutomatic disconnection with 3 time restart attempt

Overheat protection Warning before shut-off - with automatic restart

Battery charger

*Charge Characteristic

6 steps: Bulk, Absorption, Floating, Equalization, reduced oating, periodic absorption

Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03

*Maximum charging current160 A140 A100 A120 A

*Temperature compensationWith BTS-01 or BSP 500/1200

Power Factor Correction (PFC)EN 61000-3-2

General data

XTH 3000-12XTH 5000-24XTH 6000-48XTH 8000-48

*Input voltage range150 to 265 Vac / 50 to 140 Vac

(1)

Input frequency45 to 65 Hz

Input current max. (transfer relay) / Output current max.

50 Aac / 56 Aac50 Aac / 80 Aac

Transfer time< 15 ms

Multifunction contacts2 independent contacts (potential free 3 points, 16 Aac / 5 Adc)

Weight34 kg40 kg42 kg46 kg

Dimensions h/w/l [mm]230 / 300 / 500230 / 300 / 500230 / 300 / 500

Protection index IP20

EU declaration of conformity

Low Voltage Directive (LVD) 2014/35/EU:

- EN 50178:1997

Electromagnetic Compliance (EMC) Directive 2014/30/EU:

- EN 62040-2:2006, EN 61000-3-2:2014, EN 61000-3-12:2011

Operating temperature range-20 to 55°C

Relative humidity in operation95 % without condensation

Ventilation Forced from 55°C

Acoustic level <40 dB / <45 dB (without/with ventilation)

Warranty 5 years

ISO Certication9001:2008 / 14001:2004

Accessories

Remote control RCC-02 or RCC-03

llll

Module Xcom-232i

llll

Communication sets Xcom-LAN /w Xcom-GSM / Xcom-SMS

llll

Battery Status Processor BSP

llll

Remote Control Module RCM-10 (3 m)

2 aux. contacts module ARM-02

Cooling Module ECF-01

Battery temp. sensor BTS-01 (3 m)

llll

Communication cable for 3ph and // CAB-RJ45-8-2

llll

Mounting frame X-Connect

llll

Produktspecifikationer