Supermicro X8DTN+ Bruksanvisning
Supermicro
moderkort
X8DTN+
Läs gratis den bruksanvisning för Supermicro X8DTN+ (99 sidor) i kategorin moderkort. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5.5 recensioner. Har du en fråga om Supermicro X8DTN+ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/99

USER’S MANUAL
Revision 1.2
X8DTN+
X8DTN+-LR

Manual Revision 1.2
Release Date: Jan. 27, 2012
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2012 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

Preface
About This Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users. It provides information for the installation and use of the X8DTN+/
X8DTN+-LR motherboard.
About This Motherboard
The X8DTN+/X8DTN+-LR supports the Intel 5500/5600 Series Proces-
sors, the rst dual-processing platform that offers Intel QuickPath Interconnect
(QPI) Technology to provide the next generation point-to-point system interface,
replacing the current Front Side Bus. With the 5500/5600 Series Processors built
in, the X8DTN+/X8DTN+-LR substantially enhances system performance with in-
creased bandwidth and unprecedented scalability. This motherboard is optimized
for intensive-applications and high-end servers. Please refer to our web site (http://
www.supermicro.com/products/) for processor and memory support updates. This
product is intended to be installed and serviced by a professional technician.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board and provides detailed information about the 5520 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A lists BIOS POST Error Codes. Appendix B provides Software Instal-
lation Instructions.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components.
iii
Preface
Produktspecifikationer
Varumärke: | Supermicro |
Kategori: | moderkort |
Modell: | X8DTN+ |
Bredd: | 347 mm |
Djup: | 330 mm |
Wi-Fi: | Nej |
Maximalt internminne: | 288 GB |
RAID-stöd: | Ja |
Minnesspänning: | 1.5 V |
Antal processorer som stöds: | 2 |
Intel® Xeon-serien: | X5500, X5600 |
Minnestyper som stöds: | DDR3-SDRAM |
BIOS-typ: | AMI |
ACPI-version: | 3.0 |
processortillverkare: | Intel |
Antal LAN (RJ-45) anslutningar: | 2 |
Temperatur vid drift: | 10 - 35 ° C |
Temperaturintervall (förvaring): | -40 - 70 ° C |
Intervall för relativ operativ luftfuktighet: | 5 - 90 % |
Fuktighet (förvaring): | 5 - 95 % |
processorsockel: | Socket B (LGA 1366) |
Seriella portar: | 1 |
Hållbarhetscertifiering: | RoHS |
Antal PS/2-portar: | 2 |
Nätverksansluten (Ethernet): | Ja |
Antal USB 2.0 anslutningar: | 2 |
RAID-nivåer: | 0, 1,10 |
Minnets hastigheter: | 800,1066,1333 MHz |
USB 2.0 anslutning: | 5 |
Antalet Seriella ATA anslutningar: | 6 |
BIOS minnesstorlek: | 32 mbit |
LAN-styrenhet: | Intel® 82576 |
Moderkortets chipset: | Intel® 5520 |
Moderkort formfaktor: | Utökad ATX |
Kvalitet på VGA (D-Sub) porten: | 1 |
Lagringsenhetsgränssnitt som stöds: | SATA, SATA II |
Antalet DIMM-platser: | 18 |
Som stöds DIMM-modul kapacitet: | 16GB |
Chassits genomgångsanslutning: | Ja |
Antalet parallella ATA-anslutningar: | 1 |
PCI Express x4 platser: | 1 |
PCI Express x8 kortplatser: | 2 |
Stöds QPI: | 6.4 GT/s |
PCI-X-kortplatser: | 3 |
Behöver du hjälp?
Om du behöver hjälp med Supermicro X8DTN+ ställ en fråga nedan och andra användare kommer att svara dig
moderkort Supermicro Manualer
14 Juni 2025
16 Februari 2025
15 Februari 2025
19 December 2024
5 December 2024
27 Oktober 2024
27 Oktober 2024
21 Oktober 2024
7 Oktober 2024
25 September 2024
moderkort Manualer
Nyaste moderkort Manualer
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025