Taylor 3710-21 Bruksanvisning
Läs gratis den bruksanvisning för Taylor 3710-21 (2 sidor) i kategorin Köksvåg. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Taylor 3710-21 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Mechanical Kitchen Scale
3710
®
Leading the Way in Accuracy
Instruction Manual
Instruction Manual
Instruction Manual
Instruction ManualInstruction Manual
Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor® scale is an
example of superior design and craftsmanship. Please read this instruction
manual carefully before use. Keep these instructions handy for future
reference.
1. Place the scale base on a hard, level surface.
2. There may be pieces of cardboard and plastic fasteners between the
base and platform support bar to prevent damage during shipping. Do
not remove cardboard stabilizers until instructed to do so.
3. On the platform support bar on the top of the scale, there are 2 screws in
the outermost holes. Loosen and remove the screws. Set the screws aside.
Take care not to misplace the screws.
4. Place the bowl frame on the platform support bar. Line up two of the
crossbar screw holes with the screw holes on the support bar.
5. Place one of the screws through the top of one of the holes. Tighten the
screw with a Philips screwdriver. Repeat with the other screw hole.
6. Remove cardboard stabilizers
7. The scale may be disassembled for storage by removing the weighing tray
and loosening the screws and removing the crossbar.
1. Place the scale base on a hard, level surface. Place the weighing tray so
that it is stable on top of the base unit.
2. 0The pointer should indicate “ ” before objects to be weighed are placed
on the scale. To adjust the pointer to “ ”, use the adjustment dial located 0
on the top of the base unit.
3. Carry the scale by holding the base unit. Take care not to drop the tray. If
the scale is relocated, recalibration to “ ” may be required. To do so, 0
repeat steps 1 and 2.
Assembly Instructions
Calibration/General Weighing Operation
Produktspecifikationer
| Varumärke: | Taylor |
| Kategori: | Köksvåg |
| Modell: | 3710-21 |
Behöver du hjälp?
Om du behöver hjälp med Taylor 3710-21 ställ en fråga nedan och andra användare kommer att svara dig
Köksvåg Taylor Manualer
8 Januari 2025
8 Januari 2025
8 Januari 2025
28 December 2024
26 September 2024
22 September 2024
13 September 2024
13 September 2024
13 September 2024
13 September 2024
Köksvåg Manualer
- Orbegozo
- Fagor
- Bifinett
- Steren
- Quigg
- Sunbeam
- Adler
- Kunft
- Clatronic
- AENO
- Gorenje
- Maestro
- Tanita
- Jocca
- Concept
Nyaste Köksvåg Manualer
3 April 2025
3 April 2025
30 Mars 2025
27 Mars 2025
17 Mars 2025
8 Mars 2025
25 Februari 2025
25 Februari 2025
25 Februari 2025
21 Februari 2025