TC Electronic UniTune Clip Bruksanvisning

TC Electronic Inte kategoriserad UniTune Clip

Läs gratis den bruksanvisning för TC Electronic UniTune Clip (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om TC Electronic UniTune Clip eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

UNITUNE CLIP

Clip-On Tuner with Strobe and

Chromatic Modes and 108 LED Matrix Display

for Uncompromised Tuning Quality

Quick Start Guide

(1)

POWER button turns Unitune Clip on and o . Unitune Clip

turns o automatically after 5 minutes.

(2)

REFERENCE TONE button can be used to adjust the reference

pitch used for tuning up or down from the default setting (A =

440 Hz). See “Changing the Reference Pitch” for instructions.

(3)

DISPLAY MODE button toggles between Needle and Strobe

tuning modes.

(4)

ADAPTIVE DISPLAY ORIENTATION INDICATORS show the

current display direction. The display will automatically  ip to

stay oriented for viewing at all times.

(5)

MAIN DISPLAY shows the individual pitch of the currently-

tuned string in Needle/Strobe Tuning Mode.

(6)

SECONDARY DISPLAY shows the detected note name for the

currently-tuned string.

Visit tcelectronic.com to download the full manual

(5)

(4)

(3)

(2) (1)

(6)

Needle Mode

In Needle Mode, a single string’s pitch is indicated by a column of  ve

LEDs in the MAIN DISPLAY, and the target pitch’s name appears in the

SECONDARY DISPLAY.

Tune the string until the column of LEDs are centered and “on target”

(left =  at; right = sharp).

Strobe Mode

In Strobe Mode, a single string’s pitch has two indicators:

• Red LEDS to the left ( at) or right (sharp)

of the center LED column

• “Rotating” segments in the display

Tune the string until the rotating segments slow down and stop,

and only the center column of LEDs lights up.

Changing Reference Pitch

The default reference pitch (A = 440 Hz) can be changed by following

these steps:

1. Press REFERENCE TONE button. The display will show the

current reference pitch (e.g., “440” for 440 Hz).

2. To increase the reference pitch in 1 Hz steps, press the

REFERENCE TONE button.

3. To decrease the reference pitch in 1 Hz steps, press the DISPLAY

MODE button.

4. To store the currently-displayed reference pitch, refrain from

pressing either button for 2 seconds. The set reference pitch

will blink 3 times.

Produktspecifikationer

Varumärke:	TC Electronic
Kategori:	Inte kategoriserad
Modell:	UniTune Clip

Behöver du hjälp?

Om du behöver hjälp med TC Electronic UniTune Clip ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad TC Electronic Manualer

TC Electronic Flashback 2 X4 Delay Bruksanvisning

20 Februari 2025

TC Electronic BC410 Bruksanvisning

1 Januari 2025

TC Electronic Assimilator Bruksanvisning

1 Januari 2025

TC Electronic Rush Booster Bruksanvisning

1 Januari 2025

TC Electronic PLETHORA X1 Bruksanvisning

30 December 2025

TC Electronic El Cambo Overdrive Bruksanvisning

14 December 2024

TC Electronic THRUST BQ250 Bruksanvisning

14 December 2024

TC Electronic The Dreamscape Bruksanvisning

14 December 2024

TC Electronic Toneprint APP Bruksanvisning

14 December 2024

TC Electronic Sentry Noise Gate Bruksanvisning

14 December 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Planet PWR-240-48 Bruksanvisning

9 April 2025

CaterChef 445001 Bruksanvisning

9 April 2025

Daikin EKWCTRDI1V3 Bruksanvisning

9 April 2025

Simplified MFG SP18CAT120 Bruksanvisning

9 April 2025

AudioQuest Pegasus Bruksanvisning

9 April 2025

Reolink P330 Bruksanvisning

9 April 2025

Reolink NVS16-8MB8 Bruksanvisning

9 April 2025

Drive Medical RTL12045 Bruksanvisning

9 April 2025

Kern MBC-A05 Bruksanvisning

9 April 2025

Daikin EKEXVA250 Bruksanvisning

9 April 2025