TC Helicon GO Solo Bruksanvisning


Läs gratis den bruksanvisning för TC Helicon GO Solo (4 sidor) i kategorin DJ-utrustning. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 15.5 recensioner. Har du en fråga om TC Helicon GO Solo eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
GO SOLO
High-Denition Audio/MIDI Interface for Mobile Devices
Connect GO SOLO to a computer, phone or
tablet using the included cables. If using the
provided lightning cable, insert a pair of AA
batteries to power GO SOLO, or connect a 5V power
supply (not included) to power GO SOLO and charge
your iOS device.
source to the input using XLR or ¼" cables.
Plug a pair of headphones into the HEADPHONE
output. Set LEVEL control to minimum to start.
To enable phantom power move the 48 V
power switch to the ON position. The 48 V LED on
the front panel will light blue.
While speaking into the microphone or playing
your instrument, turn up the GAIN wheel. The SIG
LED should light green to indicate a signal present.
If the SIG LED lights red, turn the GAIN wheel down
to avoid clipping.
Connect MIDI devices to the mini 2.5 mm input
and output jacks using the included adapter cables.
Download your favorite TC Helicon app to
begin experimenting with eects.
Quick Start Guide
Getting started


Produktspecifikationer

Varumärke: TC Helicon
Kategori: DJ-utrustning
Modell: GO Solo

Behöver du hjälp?

Om du behöver hjälp med TC Helicon GO Solo ställ en fråga nedan och andra användare kommer att svara dig