TDK-Lambda DSP100-24 Bruksanvisning
TDK-Lambda
ej kategoriserat
DSP100-24
Läs gratis den bruksanvisning för TDK-Lambda DSP100-24 (17 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om TDK-Lambda DSP100-24 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/17
Page 1 of 17 DSP100 Series, 23418 issue 02, April 2013
Product HANDBOOK
DSP100
-
xx
General Safety Instructions:
ENGLISH
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB’s are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service
personnel from inadvertent contact with these dangerous voltages in the end equipment.
This product must be reliably earthed and professionally installed in accordance with the prevailing local
electrical wiring regulations and safety standards.
The (+) or (-) output(s) can be earthed or left floating.
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit
must be returned to TDK-Lambda UK LTD or one of their authorised agents.
Page 2 of 17 DSP100 Series, 23418 issue 02, April 2013
Product HANDBOOK
DSP100
-
xx
HOT SURFACE
External Hot Surfaces:
In accordance with local regulations for Health and Safety at work, manufacturers have an obligation to
protect service engineers as well as users. In order to comply with this, a label must be fitted to these
products which is clearly visible to service personnel accessing the overall equipment, and which legibly
warns that surfaces of these products may be hot and must not be touched when the products are in
operation.
The ventilation openings on these products must not be impeded. Ensure that there is at least 25mm spacing
between any obstruction and the ventilation openings.
The unit cover/chassis is designed to protect skilled personnel from hazards. They must not be used as part
of the external covers of any equipment where they may be accessible to operators, since under full load
conditions, part or parts of the unit chassis may reach temperatures in excess of those considered safe for
operator access.
Produktspecifikationer
| Varumärke: | TDK-Lambda |
| Kategori: | ej kategoriserat |
| Modell: | DSP100-24 |
Behöver du hjälp?
Om du behöver hjälp med TDK-Lambda DSP100-24 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat TDK-Lambda Manualer
11 Juli 2025
11 Juli 2025
ej kategoriserat Manualer
- Axis
- Senseca
- Entes
- Cateye
- Powerfix
- Pro-User
- Graco
- Stamos
- Deye
- PeakTech
- Hudson Valley
- AEG
- xTool
- Rane
- Dedra
Nyaste ej kategoriserat Manualer
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025