Techno Line KL4912 Bruksanvisning


Läs gratis den bruksanvisning för Techno Line KL4912 (6 sidor) i kategorin Väderstation. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 14.5 recensioner. Har du en fråga om Techno Line KL4912 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
KL4912 Desktop weather station
Instruction Manual
Introduction
This weather station comes with backlight, indoor and outdoor temperature &
humidity display, and alarm clock with calendar.
Fig. 1 Front view Fig. 2 Back view
1. “MODE” button
2. “MAX/MIN” button
3.
CHANNEL” button
4.
C/
°
F / RCC” button
5. “SNOOZE / LIGHT” button
6. Battery compartment
7. A/C in-jack
Getting started:
Installing A/C adapter – highly recommended
1. Remove all “AAA” batteries before plugging in A/D D/C adapter. See instructions
below.
2. Plug in A/C D/C adapter at A/C input jack (7) (see figure 2).
Batteries installation
1. Open battery compartment (6) on the back of the unit. (see figure 2)
2. Install / replace with 3x “AAA” size batteries in the compartment. It is
recommended that only alkaline batteries are used.
3. Replace the battery compartment (6) on the back of the unit.
4. A short beep will be heard to confirm proper installation of batteries.
Batteries safety warnings:


Produktspecifikationer

Varumärke: Techno Line
Kategori: Väderstation
Modell: KL4912
Färg på produkten: Wit
Internationell säkerhetskod (IP): IP20
Bildsensortyp: Passieve infraroodsensor (PIR)
Maximal räckvidd: 8 m
Mått (B x D x H): 116 x 20 x 80 mm
Max räckvidd utomhus: 100 m
Ljuskänslighet: 1000 Lux

Behöver du hjälp?

Om du behöver hjälp med Techno Line KL4912 ställ en fråga nedan och andra användare kommer att svara dig