Texas Instruments LP311DR Bruksanvisning
Texas Instruments
Inte kategoriserad
LP311DR
Läs gratis den bruksanvisning för Texas Instruments LP311DR (14 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6.5 recensioner. Har du en fråga om Texas Instruments LP311DR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/14
LP211, LP311
LOW-POWER DIFFERENTIAL COMPARATORS
WITH STROBES
SLCS003D − JUNE 1987 − REVISED SEPTEMBER 2003
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DLow Power Drain . . . 900 μW Typical With
5-V Supply
DOperates From 15 V or From a Single±
Supply as Low as 3 V
DOutput Drive Capability of 25 mA
DEmitter Output Can Swing Below Negative
Supply
DResponse Time . . . 1.2 μs Typ
DLow Input Currents:
Offset Current . . . 2 nA Typ
Bias Current . . . 15 nA Typ
DWide Common-Mode Input Range:
−14.5 V to 13.5 V Using ±15-V Supply
DOffset Balancing and Strobe Capability
DSame Pinout as LM211, LM311
DDesigned To Be Interchangeable With
Industry-Standard LP311
description/ordering information
The LP211 and LP311 devices are low-power versions of the industry-standard LM211 and LM311 devices.
They take advantage of stable, high-value, ion-implanted resistors to perform the same function as the LM311
series, with a 30:1 reduction in power consumption, but only a 6:1 slowdown in response time. They are well
suited for battery-powered applications and all other applications where fast response times are not needed.
They operate over a wide range of supply voltages, from ±18 V down to a single 3-V supply with less than 300-μA
current drain, but are still capable of driving a 25-mA load. The LP211 and LP311 are quite easy to apply free
of oscillation if ordinary precautions are taken to minimize stray coupling from the output to either input or to the
trim pins. In addition, offset balancing is available to minimize input offset voltage. Strobe capability also is
provided to turn off the output (regardless of the inputs) by pulling the strobe pin low.
The LP211 is characterized for operation from −25°C to 85°C. The LP311 is characterized for operation from
0 C.°C to 70°
ORDERING INFORMATION
TA
VIO max
AT 25°CPACKAGE†ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (P) Tube of 50 LP311P LP311P
0°C to 70°C
7 5 mV
SOIC (D)
Tube of 75 LP311D
LP311
−0° °C to 70 C 7.5 mV SOIC (D) Reel of 2500 LP311DR LP311
SOP (PS) Reel of 2000 LP311PSR L311
25°C to 85°C
7 5 mV
SOIC (D)
Tube of 75 LP211D
LP211
−25° °C to 85 C 7.5 mV SOIC (D) Reel of 2500 LP211DR LP211
†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
Copyright © 2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
2
3
4
8
7
6
5
EMIT OUT
IN+
IN−
VCC−
VCC+
COL OUT
BAL/STRB
BALANCE
LP211 . . . D PACKAGE
LP311 . . . D, P, OR PS PACKAGE
(TOP VIEW)
Produktspecifikationer
| Varumärke: | Texas Instruments |
| Kategori: | Inte kategoriserad |
| Modell: | LP311DR |
Behöver du hjälp?
Om du behöver hjälp med Texas Instruments LP311DR ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Texas Instruments Manualer
15 Oktober 2024
6 Oktober 2024
3 Oktober 2024
28 September 2024
22 September 2024
18 September 2024
16 September 2024
13 September 2024
13 September 2024
12 September 2024
Inte kategoriserad Manualer
- Focal
- OneConcept
- Boori
- MSpa
- Lorelli
- Dave Smith
- Dymond
- Lexar
- Exibel
- Uvex
- Upo
- Constructa
- Amana
- Victorio
- PowerColor
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025