Thule 821 Low Rider Bruksanvisning

Thule Cykelhållare 821 Low Rider

Läs gratis den bruksanvisning för Thule 821 Low Rider (3 sidor) i kategorin Cykelhållare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om Thule 821 Low Rider eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Test security by tugging at forks. If forks can move out
of the skewer, open lever and tighten the nut slightly.
Close lever again with firm pressure. Repeat if necessary.
Drill 4 places using 5/16" or 8mm drill bit
When printing from Acrobat Reader, please
make sure that “Page Scaling” is selected
to “None”.
NOTE: If you do not select “None” in
the “Page Scaling” option, the
actual size.
Low Rider attaches securely
to flat surfaces.
Recommended Mounting
Hardware 1/4" or (6mm)
bolts or screws, fender
washers, and locking nuts.
821 LOW RIDER
T
H
U
L
E
F
O
R
Y
O
U
R
T
R
U
C
K
T
H
U
L
E
F
O
R
Y
O
U
R
T
R
U
C
K
T
H
U
L
E
F
O
R
Y
O
U
R
T
R
U
C
K
T
H
U
L
E
F
O
R
Y
O
U
R
T
R
U
C
K
1
DRILLING TEMPLATE - ACTUAL SIZE OF TEMPLATE SHOULD BE 3 15/16" x 2 1/4"
Use the template below to scribe four
drilling points.
5/16" (8mm) drill bit recommended.
Always check handlebar
clearance before attaching
block.
2
Align block with drilled holes.
Tighten hardware securely.
Test installation by pulling
and shaking block.
3
With lever open, tighten nut
until the lever closes with
some resistance.
Loosen or tighten the nut as
needed so that lever closes
with some resistance.
5
Set the bicycle forks onto the skewer.
4
501-5329-03 1 of 3


Produktspecifikationer

Varumärke: Thule
Kategori: Cykelhållare
Modell: 821 Low Rider

Behöver du hjälp?

Om du behöver hjälp med Thule 821 Low Rider ställ en fråga nedan och andra användare kommer att svara dig