Tiptop Audio MODEL 258T Bruksanvisning
Tiptop Audio
Tangentbord
MODEL 258T
Läs gratis den bruksanvisning för Tiptop Audio MODEL 258T (1 sidor) i kategorin Tangentbord. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8.5 recensioner. Har du en fråga om Tiptop Audio MODEL 258T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
BUCHLA & TIPTOP AUDIO
DUAL OSCILLATOR MODEL 258
5cps 20kc
5cps 20kc
t
DUAL OSCILLATOR - MODEL 258t
Text from the Buchla 200 series catalogue from the 70's. Slight adjustments were made.
Processing input:
The processing control attenuverter
input permits control of pitch
scaling/inversion/expansion without
the need for a separate external
processor.
1V/Oct input:
Control Voltage input for 1V/oct
note tracking.
Frequency modulation control:
For adjusting vibrato depth or
creating clangorous or bell-like
tones, rich in non-harmonic upper
partials.
Oscillator frequency control:
Spans the audio spectrum of 5 Hz to
20 kHz with no range switching.
(The original graphic 5cps to 20kc
was only intended and noted to be
approximate.)
Processing control:
Used to set desired range of incoming
control voltage for expansion,
compression and inversion.
Waveshape control input:
Waveshapes can be varied from
sine to saw (OSC 1) and sine to
square (OSC 2). Voltage control of
waveshape enables powerful
dynamic control of timbre.
Two independent voltage-controlled oscillators. Each has one processing input, a frequency modulation input and a 1V/oct input.
Waveshapes, as well as frequency, can be voltage controlled. Model 258 oscillators feature low sine wave harmonic content,
negligible settling error, and high short and long-term stability, even with rapidly changing ambient temperatures.
TRIMMERS:
There are three trimmers for each oscillator on the back of the module:
1V/oct is the octave tracking trimmer and is set at the factory using high precision instruments.
SHAPE is the trimmer that set the sine wave, for the lower harmonic content of the sine wave.
VC WAVE SHAPE sets the response of the waveshaper to the incoming control voltage. Both SHAPE and VC WAVE SHAPE
trimmers are used to adjust the sine wave purity.
Eurorack 200 series
Size: 18HP - Depth: 45mm - Power: +12V 70mA / -12V 40mA
Produktspecifikationer
| Varumärke: | Tiptop Audio |
| Kategori: | Tangentbord |
| Modell: | MODEL 258T |
Behöver du hjälp?
Om du behöver hjälp med Tiptop Audio MODEL 258T ställ en fråga nedan och andra användare kommer att svara dig
Tangentbord Tiptop Audio Manualer
3 Augusti 2025
3 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
Tangentbord Manualer
- Msonic
- Native
- Enermax
- Nuki
- NPLAY
- Patriot
- Cooler Master
- Aukey
- Krüger And Matz
- Essentiel B
- Belkin
- Digitech
- Konig
- Satel
- AMX
Nyaste Tangentbord Manualer
22 Augusti 2025
21 Augusti 2025
21 Augusti 2025
20 Augusti 2025
19 Augusti 2025
19 Augusti 2025
19 Augusti 2025
19 Augusti 2025
19 Augusti 2025
18 Augusti 2025