Totolink ND150 Bruksanvisning

Totolink Router ND150

Läs nedan 📖 manual på svenska för Totolink ND150 (1 sidor) i kategorin Router. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

Hardware Installation The RJ11 port of this Modem Router can only connect to ADSL Filter. Please follow steps in below diagram in correct order.

1. Please disconnect the power adapter and all cables during thunderstorm weather;

2. Keep away from heat source and keep well ventilated;

3. Please pay attention to the waterproofing and moisture-proof when storing,

transporting and running.

4. The power supply must reach the rated current and power.

5. Put the router in flat places.

Set Up PC

For Windows 2000 or Windows XP Operating System, please comply with following steps to set up.

Right-click “My Network

Places”, click “Properties”

Right-click “Local Area

Connection”, click “Properties”

Double-click “Internet Protocol

(TCP/IP)”

Choose “Obtain an IP address

automatically” and “Obtain DNS

server address automatically”,

click “OK”; go back to previous

interface and click “OK”

For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.

Click “Start— Control Panel— Network

and Internet— Network Connection”,

right-click “Local Area Connection”,

and choose “Properties”.

Double-click “Internet Protocol

Version 4 (TCP/IPv4)”

Choose “Obtain an IP address automatically”

and “Obtain DNS server address automatically”,

click “OK”; go back to previous interface and

click “OK”

Quick Installation Guide

Wireless N ADSL2+ Modem Router

Set Up Router

Please set up the router following below steps.

Run the Web browser.

Type http://192.168.1.1 in the web browser, then press Enter.

Wireless Network Connection

Right-click “My Network

Places”, click “Properties”

Right-click “Wireless Network

Connection”, and click “View

Available Wireless Networks”

Confirm the wireless network SSID name,

choose one that you would like to connect,

then click “Connect”

Input the encrytion key and click “Connect”

Have connected wireless network, you can access

Internet through wireless mode.

For more information, please go to www.totolink.net

Input the Username and Password, then click Login button

(The default Username and Password is admin).

Choose Easy Setup. Select the language according to your country

and click NEXT (The default language is English).

NOTE:

Information in this document is subject to change without prior notice.

NOTE:

After you set the Pre-Shared Key, please remember your SSID and

the Pre-Shared Key to connect with your wireless LAN.

Telephone

Cable

Telephone Cable

Telephone

Cable

Power Adapter

ADSL Splitter

Network

Cable

Fill in the related content based on the information provided

by your ISP, click Next.

Setup the wireless parameters, then click APPLY to save your settings.

Now, you have finished Easy Setup, click CLOSE.

Suitable for: ND150,ND300

V.14.10

2015

DC IN

POWER

ADSL

1 LAN/WAN

2/3/4 LAN

This socket is used to connect the power adapter.

This button is used to power on or off the ADSL Router.

This RJ11 ADSL port is used to connect to the ISP.

This port is used to connect the router to the local PC/ Internet.

These ports are used to connect the router to local PC.

This button is used to power on/off the WiFi signal.WiFi

WPS/RST

Press the button for more than 5 seconds, the router will restore factory settings.

For less than 5 seconds, the router will establish Wi-Fi protected settings(WPS)

automatically.

Ports and Buttons Description

FAQ

How to find the IP address and user name & password

on the device?

How to reset the router to default factory settings?

1.When the router is powered on, press the WPS/RST button for about 10s.

2.The router’s CPU LED indicator keeps flashing, which means you have

reset your router to default settings successfully.

On the rear panel of the Router, there is IP address, User name and

password printed on the sticker. See below:

Produktspecifikationer

Varumärke:	Totolink
Kategori:	Router
Modell:	ND150
Vikt:	800 g
Bredd:	63 mm
Djup:	180 mm
Höjd:	35.5 mm
Internationell säkerhetskod (IP):	IP20
Hållbarhetscertifikat:	RoHS
Uteffekt:	75 W
Utström:	5 A
Spännande:	12 V
AC-ingångsspänning:	100 - 305 V