Trendnet TEW-734APO Bruksanvisning
Trendnet
Åtkomstpunkt
TEW-734APO
Läs gratis den bruksanvisning för Trendnet TEW-734APO (18 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Trendnet TEW-734APO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/18
TEW-734APO
TEW-734APO (V1) / 06.19.2015
Ÿ13 dBi Outdoor PoE Access Point
ŸQuick Installation Guide (1)
1. Before You Start
1
Minimum Requirements
ŸTEW-734APO
ŸCD-ROM (User's Guide)
ŸQuick Installation Guide
ŸMounting hardware
ŸPower adapter (24V DC, 1A)
ŸPoE injector
ŸGrounding wire
ŸComputer with an Ethernet port and Web Browser
ŸNetwork switch or router with an available network port
Ÿ2 x network cables
Note : The TEW-734APO does not support IEEE 802.3af. You must use the included
proprietary Power over Ethernet (PoE) injector.
Package Contents
2. Configuring a WDS connection
ŸThe default IP address of the TEW-734APO is 192.168.10.100. To configure the
unit, your network adapter must have an IP address within the 192.168.10.XX
range.
(192.168.10.1 – 192.168.10.254)
Please refer to the Appendix in the User's Guide for more information.
ŸAll antivirus and firewall software must be disabled before configuring the
TEW-734APO.
ŸThe initial configuration should be done in a testing environment, with two
TEW-734APO units approximately 15 ft. (5 meters) apart.
ŸConfigure and connect the devices before they are mounted.
1. Write the MAC address of the two TEW-734APOs. The MAC address can be
found on the label on the back of the unit.
Note:
TEW-734APO
Product Description: 13 dBi Outdoor PoE Access Point (5 Ghz)
IP Address: 192.168.10.100
Passwork: admin
FCC ID
Domain FCC H/W: 0.5
MAC: XXX XXXXXXXXX
SN: 1523H21ANU000985 MADE IN CHINA
2
2. Pinch the tab and slide the cover down.
3. Connect a network cable into the PoE port on the TEW-734APO.
4. Data & Power Out Connect the other end of the network cable to the port on the
included Power over Ethernet (PoE) Injector.
5. Using the second network cable, connect one end to the port of the PoE Data In
injector.
6. Connect the other end of the second network cable to your computer's network
port.
7. Connect the power cord to the PoE Injector, and plug the adapter into an electrical
outlet.
8. Assign a static IP address to your computer's network adapter, using the subnet
setting 192.168.10.XX (192.168.10.00 – 192.168.10.255). For this example we
will assign our computer with 192.168.10.30.
Note: The default IP address of the TEW-734APO is 192.168.10.100. Do not set
your computer's network adapter to this address.
9. Set the subnet mask to 255.255.255.0.
10. Open your web browser, and enter the IP address 192.168.10.100 into the
address bar to log into the TEW-734APO.
7
5 4
Produktspecifikationer
| Varumärke: | Trendnet |
| Kategori: | Åtkomstpunkt |
| Modell: | TEW-734APO |
Behöver du hjälp?
Om du behöver hjälp med Trendnet TEW-734APO ställ en fråga nedan och andra användare kommer att svara dig
Åtkomstpunkt Trendnet Manualer
18 Oktober 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
20 September 2024
20 September 2024
20 September 2024
20 Augusti 2024
19 Augusti 2024
Åtkomstpunkt Manualer
- Black Box
- Mach Power
- Huawei
- Linksys
- Intellinet
- Draytek
- Silex
- Juniper
- Media-tech
- StarTech.com
- SMC
- Syscom
- Advantech
- Moog
- LigoWave
Nyaste Åtkomstpunkt Manualer
9 April 2025
9 April 2025
5 April 2025
2 April 2025
20 Mars 2025
28 Februari 2025
27 Januari 2025
26 Januari 2025
14 Januari 2025
14 Januari 2025