Tripp Lite SmartPro SMART1500LCDTXL Bruksanvisning
Tripp Lite
UPS
SmartPro SMART1500LCDTXL
Läs gratis den bruksanvisning för Tripp Lite SmartPro SMART1500LCDTXL (40 sidor) i kategorin UPS. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Tripp Lite SmartPro SMART1500LCDTXL eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/40

1
UPS Systems
Models:
SMART1500LCDTXL, SMART1500TSU
(Series Numbers AG-8892, AG-0304)
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
Español 14 • Français 27
18-09-059-9338B6.indb 1 1/4/2019 3:30:58 PM

2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the
installation, operation, maintenance and storage of the UPS and batteries. Failure
to heed these warnings may affect the warranty.
UPS Location Warnings
• Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust
or direct sunlight.
• For best performance, keep the indoor temperature between 32º F and 104º F
(0º C and 40º C).
• Leave adequate space around all sides of the UPS for proper ventilation.
• Only set the UPS upright on a sturdy flat surface. Do not block fans or ventilation holes, as
this will seriously inhibit the unit's internal cooling and cause product damage not covered
under warranty.
UPS Connection Warnings
• Connect your UPS directly to a properly-grounded AC power outlet. Do not plug the UPS into
itself; this will damage the UPS.
• Do not modify the UPS plug, and do not use an adapter that would eliminate the UPS
ground connection.
• Do not use extension cords to connect the UPS to an AC outlet.
• If the UPS receives power from a motor-powered AC generator, the generator must provide
clean, filtered, computer-grade output.
• The mains socket outlet that supplies the UPS should be easily accessible and located near
the UPS.
Equipment Connection Warnings
Install in accordance with National Electrical Code standards ANSI/NFPA
70 and Canadian Electrical Code, Part I, C22.1.
Short-circuit backup protection and overcurrent protection is provided by
the building installation.
To reduce the risk of fire, connect only to a circuit provided with branch
circuit overcurrent protection in accordance with the National Electrical
Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1. The
plug on the power supply cord is intended to serve as the disconnect
device. Be sure that the socket-outlet is installed near the equipment and
is made easily accessible.
Important Safety Instructions
18-09-059-9338B6.indb 2 1/4/2019 3:30:58 PM

3
Important Safety Instructions
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
• Do not connect surge protectors or extension cords to the output of your UPS. This might
damage the UPS and may affect the surge protector and UPS warranties.
• Connect the UPS to an outlet that is adequately protected against excess currents, short
circuits and earth faults as part of the building installation.
Battery Warnings
• Batteries can present a risk of electrical shock and burn from high short-circuit current.
Observe proper precautions. There are no user-serviceable parts inside the UPS. Do not
open the UPS except to perform battery replacement. Do not open batteries. Do not
short or bridge the battery terminals with any object. Do not dispose of batteries in a fire.
The batteries may explode. Released material is harmful to the skin and eyes. It may be
toxic. Unplug and turn off the UPS before performing battery replacement. Use tools with
insulated handles. Battery replacement should be performed only by authorized service
personnel using the same number and type of batteries (sealed lead-acid). Do not dispose
of the batteries in a fire. Tripp Lite offers a complete line of UPS System Replacement
Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/products/battery-
finder to locate the specific replacement battery for your UPS.
CAUTION: A battery can present a risk of electrical shock and high short-
circuit current. Contact with any part of a grounded battery can result in
electrical shock. The following precautions should be observed when working
on batteries:
• Remove watches, rings or other metal objects.
• Use tools with insulated handles.
• Wear rubber gloves and boots.
• Do not lay tools or metal parts on top of batteries.
• Disconnect charging source and load prior to installing or maintaining the battery.
• Remove battery grounds during installation and maintenance to reduce likelihood
of shock.
• Remove the connection from ground if any part of the battery is determined to be
grounded.
UPS and Battery Recycling
Tripp Lite products use sealed lead-acid batteries, which are highly recyclable.
Call Tripp Lite at 773.869.1234 or visit www.tripplite.com/support/recycling-program
for more information on recycling the batteries or any other Tripp Lite product.
Please refer to local codes for disposal requirements.
18-09-059-9338B6.indb 3 1/4/2019 3:30:58 PM
Produktspecifikationer
Varumärke: | Tripp Lite |
Kategori: | UPS |
Modell: | SmartPro SMART1500LCDTXL |
Enhetsplacering: | Ingebouwd |
Typ av operation: | Touch |
Färg på produkten: | Zwart |
Inbyggd display: | Nee |
Timer: | Ja |
Bredd: | 590 mm |
Djup: | 520 mm |
Höjd: | 44 mm |
Sladdlängd: | 1.5 m |
Barnlås: | Ja |
Brännare/kokzonseffekt 2: | 2300 W |
Brännare/kokzonseffekt 3: | 2300 W |
Brännare/kokzonseffekt 1: | 1200 W |
Antal brännare/kokzoner: | 3 zone(s) |
Typ av häll: | Inductiekookplaat zones |
Brännare/kokzon typ 1: | Sudderen |
Brännare/kokzon typ 2: | Groot |
Typ av brännare/kokzon 3: | Extra groot |
Lätt att städa: | Ja |
Antal gasbrännare: | 0 zone(s) |
Antal elektroniska kokzoner: | 3 zone(s) |
Sjud brännaren/kokzonens diameter: | 145 mm |
Vanlig brännare/kokzonsdiameter: | 210 mm |
Sjud brännare/kokzon: | 1400 W |
Normal brännare/kokzon: | 2300 W |
Kontrollposition: | Rechtsboven |
Ansluten last (elektrisk): | 8800 W |
Installationsfackets bredd: | 560 mm |
Installationsfack djup: | 490 mm |
Stor brännare/kokzonsdiameter: | 280 mm |
Stor brännare/kokzon: | 3700 W |
Ansluten last (gas): | - W |
Hob²Hood funktion: | Ja |
Bredd på häll: | 60 cm |
Boost funktion: | Ja |
Förstärk normal brännare/häll: | 3700 W |
Varningssignal: | Ja |
Restvärmeindikator: | Ja |
Antal kokzoner som ska användas samtidigt: | 3 |
Strömkälla brännare/kokzon 1: | Electrisch |
Strömkälla brännare/kokzon 2: | Electrisch |
Strömkälla brännare/kokzon 3: | Electrisch |
Kookzone 2 boost: | 3400 W |
Kookzone 3 boost: | 3400 W |
Placera brännare/kokzon 1: | Links achter |
Diameter brännare/kokzon 1: | 145 mm |
Placera brännare/kokzon 2: | Links voor |
Brännare/kokzons diameter 2: | 210 mm |
Placera brännare/kokzon 3: | Rechts |
Brännare/kokzons diameter 3: | 240 mm |
Kokzon 1 form: | Rond |
Kokzon 2 form: | Rond |
Kokzon 3 form: | Rond |
AC-ingångsspänning: | 220-240 V |
AC-ingångsfrekvens: | 50-60 Hz |
Inbyggd fläktkåpa: | Nee |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite SmartPro SMART1500LCDTXL ställ en fråga nedan och andra användare kommer att svara dig
UPS Tripp Lite Manualer
31 December 2025
20 Oktober 2024
18 Oktober 2024
9 Oktober 2024
9 Oktober 2024
4 Oktober 2024
2 Oktober 2024
29 September 2024
29 September 2024
26 September 2024
UPS Manualer
- SurgeX
- Emerson
- Hikvision
- Minute Man
- Minuteman
- Altronix
- Online USV
- HP
- LC-Power
- Vanson
- Jung
- CyberPower
- Eaton
- Equip
- Middle Atlantic
Nyaste UPS Manualer
3 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025