Tripp Lite SmartPro SMART1500LCDT Bruksanvisning

Tripp Lite UPS SmartPro SMART1500LCDT

Läs gratis den bruksanvisning för Tripp Lite SmartPro SMART1500LCDT (36 sidor) i kategorin UPS. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Tripp Lite SmartPro SMART1500LCDT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/36
LCDT-Series UPS Systems
Models:
SMART1500LCDT, OMNI1500LCDT, SMART1300LCDT
(AG-0066, AG-0067, AG-0068)
Important Safety Instructions 2
Quick Installation 3
Basic Operation 4
UPS On/Off 4
LCD Display 5
Display UPS/Power Conditions 6
Enable/Disable Alarm 6
Self-Test 7
Error Messages 7
Features 8
Battery Replacement 9
Storage and Service 10
Warranty Registration 11
Español 13
Français 25
Owner’s Manual
Warranty
Registration
Register online today for a
chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/support
Copyright © 2012 Tripp Lite. All rights reserved. SmartPro
® is a registered trademark of Tripp Lite.
TEST MUTE
TEST MUTE
12-12-069-93-327C.indb 1 12/6/2012 9:28:34 AM
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation and
storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
• InstallyourUPSindoors,awayfromexcessmoistureorheat,conductivecontaminants,dustordirectsunlight.
• Forbestperformance,keeptheindoortemperaturebetween32ºFand104ºF(0ºCand40ºC).
• LeaveadequatespacearoundallsidesoftheUPSforproperventilation.
• OnlysettheUPSuprightonasturdyatsurface.Donotblockfansorventilationholes,asthiswillseriouslyinhibittheunit'sinternal
cooling and cause product damage not covered under warranty.
UPS Connection Warnings
• ConnectyourUPSdirectlytoaproperlygroundedACpoweroutlet.DonotplugtheUPSintoitself;thiswilldamagetheUPS.
• DonotmodifytheUPS’splug,anddonotuseanadapterthatwouldeliminatetheUPS’sgroundconnection.
• DonotuseextensioncordstoconnecttheUPStoanACoutlet.
• IftheUPSreceivespowerfromamotor-poweredACgenerator,thegeneratormustprovideclean,ltered,computer-gradeoutput.
• ThemainssocketoutletthatsuppliestheUPSshouldbeeasilyaccessibleandlocatedneartheUPS.
Equipment Connection Warnings
• Useofthisequipmentinlifesupportapplicationswherefailureofthisequipmentcanreasonablybeexpectedtocausethefailureof
thelifesupportequipmentortosignicantlyaffectitssafetyoreffectivenessisnotrecommended.Donotusethisequipmentinthe
presenceofaammableanestheticmixturewithair,oxygenornitrousoxide.
• DonotconnectsurgesuppressorsorextensioncordstotheoutputofyourUPS.ThismightdamagetheUPSandmayaffectthesurge
suppressor and UPS warranties.
• ConnecttheUPStoanoutletthatisadequatelyprotectedagainstexcesscurrents,shortcircuitsandearthfaultsaspartofthe
building installation.
Battery Warnings
• Batteriescanpresentariskofelectricalshockandburnfromhighshort-circuitcurrent.Observeproperprecautions.Thereareno
user-serviceablepartsinsidetheUPS.DonotopentheUPSexcepttoperformbatteryreplacement.Donotopenbatteries.Donot
short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools
withinsulatedhandles.Batteryreplacementshouldbeperformedonlybyauthorizedservicepersonnelusingthesamenumberand
typeofbatteries(SealedLead-Acid).Donotdisposeofthebatteriesinare.Thebatteriesarerecyclable.Refertoyourlocalcodes
fordisposalrequirementsorintheUSAonlycall1-800-SAV-LEADor1-800-8-BATTERY(1-800-822-8837)orvisitwww.rbrc.com
forrecyclinginformation.TrippLiteoffersacompletelineofUPSSystemReplacementBatteryCartridges(R.B.C.).VisitTrippLiteon
theWebatwww.tripplite.com/support/battery/index.cfmtolocatethespecicreplacementbatteryforyourUPS.
Important Safety Instructions
12-12-069-93-327C.indb 2 12/6/2012 9:28:34 AM
3
STEP 1: Plug the UPS into a properly grounded outlet.
After plugging the UPS into a wall outlet, press and hold the POWER BUTTONforone
secondtoturnontheUPS(SeeBasicOperationSection).
Note: The UPS will not turn on automatically in the presence of live utility power.
STEP 2: Plug your equipment into the UPS.
There are two sets of outlets on the back of your UPS. Outlets marked SURGE PROTECTED
do not provide battery backup power during power outages. Connect common desktop
itemslikeprinters,scannersandotheraccessoriesnotrequiringbatterysupporttothese
outlets.
OutletsmarkedBATTERY/SURGEPROTECTED offer UPS battery backup support during
powerfailures.Connectyourvitalcomputerequipmentintotheseoutlets.
YourUPSisdesignedtosupportelectronicequipmentonly.YouwilloverloadtheUPSif
thetotalVAratingsforalltheequipmentconnectedtotheBATTERY/SURGEPROTECTED
outletsexceedtheUPSoutputcapacity.Tondyourequipment’sVAratings,lookontheir
nameplates.Ifthe equipment islistedin amps, multiplythe numberofamps by 120to
determineVA.Forexample:1amp×120=120VA.Ifyoususpectyouhaveoverloaded
the outlets, check the Load Percentage and Load Meter screens (See Display UPS/Power
ConditionsdescriptionsinBasicOperationSection).Ifyouarestillunsure,runaself-test
(SeeSelf-TestdescriptioninBasicOperationSection).
Optional Installation
AllmodelsincludeUSBcommunicationports,tel/DSL/Ethernet(NotcompatiblewithPoE
applications)surgeprotectionjacksandcoaxiallineprotectionjacks.Theseconnections
areoptional;theUPSwillworkproperlywithouttheseconnections.Seetheconnector's
descriptionintheBasicOperationsectionforconnectioninstructions.
IftheLINEPOWERicon doesnotilluminatewhentheUPSisturnedON,trythefollowing:
1. Make sure that the UPS is plugged into a live AC outlet.
2. Press and hold the POWER BUTTONforonesecondtoturnontheUPS.Abeepshould
sound when the UPS starts.
3. IftheUPSstilldoesnotstart,contactTrippLiteTechSupportforassistance.
Quick Installation
12-12-069-93-327C.indb 3 12/6/2012 9:28:35 AM

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: UPS
Modell: SmartPro SMART1500LCDT

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite SmartPro SMART1500LCDT ställ en fråga nedan och andra användare kommer att svara dig