Trotec VSC3008 Bruksanvisning
Trotec
Inte kategoriserad
VSC3008
Läs gratis den bruksanvisning för Trotec VSC3008 (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3.5 recensioner. Har du en fråga om Trotec VSC3008 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
TRT-BA-VSC3008-TC230423TTRT01-005-EN
VSC3008
EN
INSTRUCTIONS
VIDEOSCOPE
2 EN
videoscope VSC3008
Table of contents
Information on the use of this instructions..........................2
Safety .....................................................................................2
Information about the device................................................4
Transport and storage...........................................................7
Start-up..................................................................................7
Operation ...............................................................................8
Software...............................................................................10
Errors and faults..................................................................14
Maintenance and repair ......................................................14
Disposal ...............................................................................14
Information on the use of this instructions
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Notice
This signal word indicates important information (e.g.
material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
instructions must be observed.
You can download the current version of the instructions and
the EUdeclaration of conformity via the following link:
VSC3008
https://hub.trotec.com/?id=39601
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use.
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
• Do not use the device in potentially explosive rooms or
areas and do not install it there.
• Do not use the device in aggressive atmosphere.
• Do not use the device in atmospheres containing oil,
sulphur, chlorine or salt.
• Protect the device from permanent direct sunlight.
• Do not open the device.
• Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
• Insert the battery into the battery compartment according
to the correct polarity.
• Remove the battery from the device if you will not be using
the device for a longer period of time.
• Observe the storage and operating conditions (see
Technical data).
EN 3
videoscope VSC3008
Intended use
Only use the device for the visualization of objects.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Any use other than the intended use is regarded as misuse.
Reasonably foreseeable misuse
Do not use the device:
• in potentially explosive atmospheres
• in live environments
• in unsuitable liquids, e.g. acids and alkalis
• on people or animals
Do not use the control unit with display underwater.
Any unauthorised modifications, alterations or structural
changes to the device are forbidden.
Personnel qualification
People who use this device must:
• have read and understood the instructions, especially the
Safety chapter.
Residual risks
Warning of electrical voltage
Electric shock due to contact with live parts! Do not
touch any live parts. Secure neighbouring live parts by
covering them or by switching them off.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of explosive substances
Do not expose the batteries to temperatures above
60°C! Do not let the batteries come into contact with
water or fire! Avoid direct sunlight and moisture. There
is a risk of explosion!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Lithium-ion batteries might catch fire in case of
overheating or damage. Ensure a sufficient distance to
heat sources, do not subject lithium-ion batteries to
direct sunlight and make sure not to damage the
casing. Do not overcharge lithium-ion batteries. If the
battery is not permanently installed in the device, only
use smart chargers that switch off automatically when
the battery is fully charged. Charge lithium-ion
batteries in due time before they are discharged
completely.
Caution
Keep a sufficient distance from heat sources.
Notice
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Notice
To prevent water damages to the device, please
observe the different types of protection of the housing
and the gooseneck probe.
The housing is splash-proof (IP54), the gooseneck
probe can be immersed in water (IP67, 1m/30min).
Notice
Using the device continuously over several hours
causes an increased heat generation in the LEDs in the
probe tip. To increase the lifetime of both the LEDs and
the imaging sensor we recommend allowing the device
to cool down at ambient temperatures for at least 10 to
15 minutes with the power switched off after a long
period of use.
Notice
Do not use abrasive cleaners or solvents to clean the
device.
Produktspecifikationer
| Varumärke: | Trotec |
| Kategori: | Inte kategoriserad |
| Modell: | VSC3008 |
Behöver du hjälp?
Om du behöver hjälp med Trotec VSC3008 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Trotec Manualer
8 Oktober 2024
4 Oktober 2024
29 September 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024
22 September 2024
16 September 2024
16 September 2024
Inte kategoriserad Manualer
- Dedra
- Signature
- Oreg
- Meradiso
- Hotone
- Foxconn
- Kisag
- Batavia
- Tovsto
- COLBOR
- Mamas & Papas
- Adobe
- Analogis
- Domyos
- Rowenta
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025