Trust Predator XK 100 Bruksanvisning

Trust Kontroller Predator XK 100

Läs gratis den bruksanvisning för Trust Predator XK 100 (2 sidor) i kategorin Kontroller. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 6 recensioner. Har du en fråga om Trust Predator XK 100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Trust Predator XK 100
1
GB
1. Connecting
1. Turn off your computer.
2. Connect the plug of the joystick to the 15-pin D-connector of the game port.
Note:The game port of your PC is usually located on the sound card, with the
connector at the back of your computer. Consult the manual of your sound card
to activate the game port on your sound card.
3. Turn on your computer.
2. Installation
Note:In order for you to be able to make optimum use of your joystick and game, DirectX
5.0 (or higher) must be installed before you install the joystick.
Note:Calibration of Trust Predator XK 100 can be different for each game. Consult the
manual of the software package being used.
2.1 Windows 95 / 98 / 2000
1. Start up Windows.
2. Click on ‘Start’ on your task bar and choose Control Panel’.
3. Double-click the icon ‘Game Controllers’. See Figure 1.
Figure 1: Game-Controllers icon
4. Click on ‘Add’ to add a joystick.
5. Select ‘2 axis, 4-button joystick’.
6. Click the ‘Properties’ button.
7. Click the ‘Calibrate’ button. Follow the instructions on the screen.
8. To test your joystick, select the tab ‘Test’. Follow the instructions on your screen.
9. Trust Predator XK 100 is ready for use.
2.2 Windows 3.1x/DOS
The joystick does not have to be installed in Windows 3.1x and DOS. Calibration must then often
be carried out in the game. If necesssary, Consult the game’s manual to do this.
Note:Some games support only two fire buttons instead of four.
3. Fire buttons
Buttons 1 to 4 are fire buttons that work independently of each other. Switch A is used to activate
and deactivate the rapid-fire function of fire buttons 1 and 2.

Betygsätt denna manual

4.0/5 (6 Recensioner)

Produktspecifikationer

Varumärke: Trust
Kategori: Kontroller
Modell: Predator XK 100
Färg på produkten: Black, Blue
Vikt: 500 g
Bredd: 135 mm
Djup: 145 mm
Höjd: 205 mm
Förpackningens vikt: 5500 g
Snäll: AV-zender & ontvanger
Användarmanual: Ja
Maximal upplösning: 1920 x 1200 Pixels
Anslutning för nätadapter: Ja
Gränssnitt: Gameport
Antal knappar: 4
Extern anpassning: Ja
HDMI in: 5
RJ-45 utgångsportar: 2
Antal HDMI-utgångar: 6
RJ-45 ingångsportar: 8
Driftspänning: 5 V
Kabeltyper som stöds: Cat5
Kabellängd: 1.8 m
Produktens färg: Svart
Enhetstyp: Joystick
Windows-operativsystem som stöds: Windows 2000, Windows 95, Windows 98, Windows NT
Anslutningsteknologi: Kabel
Strömkälla: Kabel
Spelplattformar som stöds: PC

Behöver du hjälp?

Om du behöver hjälp med Trust Predator XK 100 ställ en fråga nedan och andra användare kommer att svara dig