Uni-T UT120B Bruksanvisning

Uni-T Multimeter UT120B

Läs gratis den bruksanvisning för Uni-T UT120B (2 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Uni-T UT120B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
count notebook type aut ging 4000- o-ran
Safety Information"
Safety Information
D
I
. Meter Description(See Figure 1)
International Electrical Symbols
2. SELECT Button to toggle between Resistance, Capacitance, Diode
Knob
which, however, will
if under DCV
and ACV ranges
DCV or ACV status with the range default at 400mV(DCV) or 4V(ACV)
press the button to switch between Hz and %
measurement.
Making Measurements
1.Measuring DC Voltage(See Figure 2)
2. Measuring AC Voltage(See Figure 3)
3. Measuring Resistance(See Figure 4)
4. Measuring Frequency and Duty Cycle(See Figure 5)
5. Testing Diodes and Continuity(See Dotted Part in Figure 6)
these two
all capacitors
ends
6. Measuring Capacitance(See Figure 7)
As there is a capacitance reading displayed under open-circuit status,
A. General Specifications
test pens and battery included)
pressing
wake up the meter "button to wake up the meter".
to
in-line
is connected
Technical Specifications
B. Accuracy Specifications
calibration per year.
battery
the battery with a new 3V battery.
conforms to UL STD 61010-1, 61010-2-030, 61010-031,
certified to CSA STD C22.2 NO.61010-1, 61010-2-030, 61010-031
P/N: 110401105302X
MAY.2018 REV. 1

Produktspecifikationer

Varumärke: Uni-T
Kategori: Multimeter
Modell: UT120B

Behöver du hjälp?

Om du behöver hjälp med Uni-T UT120B ställ en fråga nedan och andra användare kommer att svara dig