Uni-T UT685B KIT Bruksanvisning
Uni-T
Mätutrustning
UT685B KIT
Läs gratis den bruksanvisning för Uni-T UT685B KIT (20 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Uni-T UT685B KIT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
2
Contents
I. Overview ---------------------------------------------------------------------------------------- 3
II. Accessories ----------------------------------------------------------------------------------- 3
III. Safety Information -------------------------------------------------------------------------- 4
IV. Features --------------------------------------------------------------------------------------- 4
V. Display Features (UT685B) --------------------------------------------------------------- 5
VI.Testing Mode --------------------------------------------------------------------------------- 6
6.1 Testing Twisted-Pair Cabling --------------------------------------------------------- 6
6.2 Testing Coaxial Cabling --------------------------------------------------------------- 12
VII.POE Mode ---------------------------------------------------------------------------------- 14
VIII.Tone Mode --------------------------------------------------------------------------------- 15
8.1 Tone Mode Display ------------------------------------------------------------------- 15
8.2 UT683R Receiver (For UT685B KIT only) -------------------------------------- 16
IX. Calibrating Length Measurements (Only for test mode) ------------------------- 18
9.1 Setting the NVP to a Specified Value -------------------------------------------- 18
9.2 Determining a Cable’s Actual NVP ----------------------------------------------- 19
X. Backlight ------------------------------------------------------------------------------------ 19
XI. Unit of Length ------------------------------------------------------------------------------ 19
XII. Auto Power Off --------------------------------------------------------------------------- 19
XIII. Other functions -------------------------------------------------------------------------- 20
13.1 Low battery indication ------------------------------------------------------------- 20
13.2 Troubleshooting -------------------------------------------------------------------- 20
13.3 Specifications ----------------------------------------------------------------------- 20
XIV. Maintenance ----------------------------------------------------------------------------- 20
UT685B/UT685 B KIT EN
3 4
I. Overview
II. Accessories
If any accessories listed below is missing or damaged, please contact with your supplier
immediately.
Items
UT685B TDR cable tester
1.5V AA alkaline battery
RJ45 adapting cable
RJ11 adapting cable
RJ11 adapting cable (adapted to alligator clip)
Plug, F-connector to F-connector
User manual
Carrying bag
UT683R receiver (For UT685B KIT only)
Micro USB charging cable (For UT685B KIT only)
Quantity
1 pc
3 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
III. Safety Information
To avoid fire, electric shock or personal injury, please follows:
Do not open the casing, there is no any user-serviceable part inside.
Please operate the tester by following the user manual, otherwise the tester can be
damaged.
Check before use. Do not use damaged tester. Do not alter the tester.
Please stop use in case that the tester does not work normally.
Please replace the battery immediately if low battery symbol appears, so as to ensure
test accuracy.
IV. Features
1. Mode knob: Wire tracking mode, testing mode, POE mode
2. Power button: Long press for 2 seconds to power on, short press for 1 second to
power off
3. The buttons (multiplexed) are used to view test result.
4. LCD display with backlight
5. Select RJ45 or coaxial cable connector
6. Short press this button to switch unit, long press about one second to turn on/of f the
backlight
Press , and power button at the same time to display the software version.
Press , and power button at the same time to calibrate measured length (Only
for test mode).
7. F-Connector for connecting coaxial cable
8. Modular jack for connecting to telephone and twisted-pair network cable. The jack
accepts 8-pin modular (RJ45) and 6-pin modular (RJ11) connectors.
9. Wiremap adapter with 8-pin modular jack and coaxial F connector.
UT685B KIT is a handheld TDR cable tester, suitable for copper cables (CAT 5E CAT 6、 、
CAT 6A or CAT 8), used to detect and diagnose wiring condition of twisted pair and coaxial
cable, detect network service, short/open circuit in network cabling, split pair, miswire,
etc. It can also be applied to detect if there is PoE supply (POE module) in network cabling
and PoE standard (802.3AF, 802.3AT, 802.3BT). Wiremap, cable length, open-circuit
location and other information can be displayed on the screen simultaneously. The cable
tester is characterized by accurate, easy to operate, visibly-displayed, making it an ideal
tool for network communication maintenance, network engineering, wiring engineering,
etc.
1
2
3
45
6
78
9
UT685B/UT685B KITUT685B/UT685B KIT
Produktspecifikationer
| Varumärke: | Uni-T |
| Kategori: | Mätutrustning |
| Modell: | UT685B KIT |
Behöver du hjälp?
Om du behöver hjälp med Uni-T UT685B KIT ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Uni-T Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
Mätutrustning Manualer
- Duro Pro
- Lanaform
- Muller
- PCE Instruments
- TDE Instruments
- NEO Tools
- Eastron
- Arya
- VDO
- Benning
- Trotec
- Velleman
- BJZ
- REV
- Kyoritsu
Nyaste Mätutrustning Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025