Vanson V-828 Bruksanvisning
Vanson
Inte kategoriserad
V-828
Läs gratis den bruksanvisning för Vanson V-828 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 11 recensioner. Har du en fråga om Vanson V-828 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
GREAT BRITAIN
ENGLISH
Battery Charger
Art. no 18-2004 • Model V-828-UK, Art. no 36-1835 • Model V-828
Please read the entire instruction manual be-
fore using and save it for future use. We apolo-
gise for any text or photo errors and any chan-
ges of technical data. If you have any ques-
tions concerning technical problems please
contact our Customer Service Department.
Description
Battery charger intended for 9 V Ni-MH/ Ni-Cd
batteries, with timer to prevent overcharging.
Safety
- The charger is intended only for use with
Ni-MH/Ni-Cd batteries. Attempting to
charge a different type of battery can lead
to person injury or damage to the charger.
- Intended for indoor use only.
- Disconnect the battery charger from the
power outlet when not in use.
- Do not expose charger to humidity, sharp
blows, and shock or high temperatures.
- Do not operate the battery charger if the
plug appears to be damaged.
- Do not open the cover. Certain
components under the cover contain
dangerous electric currents. Contact with
those components can result in electric
shock.
- The battery charger may only be repaired
by qualied service personnel.
- Disconnect the plug from the power outlet
before cleaning. Do not immerse charger
in water. Clean the external parts by wiping
with a damp cloth.
Use
Please note!
- Do not charge more than one type of
battery at the same time (Ni-Cd or Ni-MH).
- Make sure you disconnect the plug from
the power outlet before you connect a new
battery for charging.
1. Attach the batteries (1-2 9 V batteries) to
the proper position in the charger. Make
sure that the battery poles are placed in
the correct way according to the markings
on the charger.
2. Connect the plug to a 230 V power outlet.
When the batteries are charging, the LEDs
will turn red.
3. Check the charging time. See table below.
When the charging cycle is complete,
disconnect the plug from the power outlet
and remove the batteries from the charger
as soon as possible.
After 8 hours of charging, the charger switches
automatically to conservation charging and the
LEDs turn off.
Charging times
Battery type Charging time
9 V, NiCd, 100 mAh 4.5 hours
9 V, NiCd, 120 mAh 5.5 hours
9 V, NiMH, 120 mAh 5.5 hours
9 V, NiMH, 150 mAh 7 hours
9 V, NiMH, 170 mAh 8 hours
Other specifications
Power supply 230 V, 50 Hz
Effect 4 W
Charging power 2 x (27-33 mA, 9 V)
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about how to dis-
pose of this product contact your municipality.
Ver. 200801
Produktspecifikationer
| Varumärke: | Vanson |
| Kategori: | Inte kategoriserad |
| Modell: | V-828 |
Behöver du hjälp?
Om du behöver hjälp med Vanson V-828 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vanson Manualer
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
Inte kategoriserad Manualer
- Blanco
- Moultrie
- Exit
- Barber Tech
- Betty Bossi
- Danfoss
- Maxcom
- ADDAC System
- Turmix
- PAG
- Testo
- LightZone
- Freedor
- Sonel
- Revamp
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025