Vaxcel Franklin T0385 Bruksanvisning

Läs gratis den bruksanvisning för Vaxcel Franklin T0385 (4 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8 recensioner. Har du en fråga om Vaxcel Franklin T0385 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Page 1/4

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

T0385

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

Features

1. Energy saving fixture.

2. Use the dim-to-bright illumination option where

you want some minimum illumination through out

the night, such as at your front entrance or garage

door. Use the dark-to-bright illumination option

where you do not need minimum brightness, such

as the backyard or back porch.

3. When in manual override mode, use wall switch

to keep the light ON till dawn.

Mounting Screw (B)

Green Grounding

Screw (C)

Lock Nut (E)

Wire Connector (F)

Ball Nut (G)

Rubber Pad (H)

Cross Bar (A)

Important to Know

1. Read all instructions carefully before installation and operation.

2. If you are not familiar with state and local electrical codes, it is

recommended that you consult with a qualified electrician.

3. Before installation, shut off power at the main fuse or circuit

breaker box. Be aware that simply turning off the wall switch is

not sufficient to prevent an electrical shock.

4. This fixture requires a 120 VAC, 60 Hz power source.

5. Do not attempt to take the lantern apart; there are no

serviceable parts inside.

6. To avoid sensor damage by lightning or electrical surge, make

sure the grounding wire is securely connected.

7. For general safety and to avoid any possible damage to the

sensor, be sure the power is switched "off" before replacing the

bulb.

8. Compatible with LED dimmable bulb.

Maximum Wattage: 60W Incandescent Bulb or 20W LED

dimmable bulb.

Work Temperature: -4°F~104°F

Hardware Package (included):

Green Grounding Screw (C)

Outlet Box

Wire Connector

(F)

Headless Screw (D)

Cross Bar (A)

Lock Nut

(E)

House Grounding Wire

Fixture Grounding Wire

Bulb Type A Max.60W or

20W LED dimmable bulb

(not included)

Mounting Screw (B)

Fixture

Back Plate

Ball Nut(G)

Rubber Pad(H)

Headless

Screw (D)

Fixture Wire

240703

Produktspecifikationer