Velleman K7302 Bruksanvisning
Velleman
Batteriladdare
K7302
Läs nedan 📖 manual på svenska för Velleman K7302 (12 sidor) i kategorin Batteriladdare. Denna guide var användbar för 15 personer och betygsatt med 4.8 stjärnor i genomsnitt av 8 användare
Sida 1/12
UNIVERSAL BATTERY CHARGER
K7302
ILLUSTRATED ASSEMBLY MANUAL H7302IP-1
Total solder points: 20
Difficulty level: beginner 1 2 3 4 5 advanced
Low cost soluton for charging of
both NiCd and NiMh batteries.
2
Specifications:
Charges Ni Cd or Ni MH batteries.
Ideal for in car use.
Transforms a mains adapter into a charger (adapter socket included).
Charge cellular phone, toys, portables, video batteries …
Selectable charge current.
LED charge indication.
Features:
Charge current (±20%): 50mA, 100mA, 200mA, 300mA, 400mA. (selectable)
Supply voltage: from 6.5VDC to 21VDC (depending on used battery)
Supply current: same as charge current.
Power supply polarity protected.
LED function indication.
Dimensions: 40 x 60 mm
Fits in G403 type housing
Features & Specifications
3
Assembly hints
1. Assembly (Skipping this can lead to troubles ! )
Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.
1.1 Make sure you have the right tools:
• A good quality soldering iron (25-40W) with a small tip.
• Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will
protect the tip, and enables you to make good connections. When solder rolls off the tip, it needs cleaning.
• Thin raisin-core solder. Do not use any flux or grease.
• A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they
cannot fly towards the eyes.
• Needle nose pliers, for bending leads, or to hold components in place.
• Small blade and Phillips screwdrivers. A basic range is fine.
For some projects, a basic multi-meter is required, or might be handy
1.2 Assembly Hints :
⇒ Make sure the skill level matches your experience, to avoid disappointments.
⇒ Follow the instructions carefully. Read and understand the entire step before you perform each operation.
⇒ Perform the assembly in the correct order as stated in this manual
⇒ Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.
⇒ Values on the circuit diagram are subject to changes.
⇒ Values in this assembly guide are correct*
⇒ Use the check-boxes to mark your progress.
⇒ Please read the included information on safety and customer service
* Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTE’ on a separate leaflet.
0.0 0
0
Produktspecifikationer
| Varumärke: | Velleman |
| Kategori: | Batteriladdare |
| Modell: | K7302 |
Behöver du hjälp?
Om du behöver hjälp med Velleman K7302 ställ en fråga nedan och andra användare kommer att svara dig
Batteriladdare Velleman Manualer
23 September 2024
10 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
Batteriladdare Manualer
- Batteriladdare ICU
- Batteriladdare Hive
- Batteriladdare LVSUN
- Batteriladdare Hama
- Batteriladdare Osram
- Batteriladdare Arctic Cooling
- Batteriladdare Tryton
- Batteriladdare Yard Force
- Batteriladdare EVBox
- Batteriladdare Apa
- Batteriladdare Dymond
- Batteriladdare Robbe
- Batteriladdare Medion
- Batteriladdare AccuPower
- Batteriladdare Recom
Nyaste Batteriladdare Manualer
9 April 2025
9 April 2025
9 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
30 Mars 2025
29 Mars 2025
26 Mars 2025