Ventev TW-HD-MOUNT502 Bruksanvisning

Ventev Inte kategoriserad TW-HD-MOUNT502

Läs gratis den bruksanvisning för Ventev TW-HD-MOUNT502 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 12.5 recensioner. Har du en fråga om Ventev TW-HD-MOUNT502 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
www.Ventev.com/Infra sales@ventev.com 800-851-4965
Co-Location Mount for Cisco Access Points
The Co-Locating Mount can be mounted on any at surface including, but not limited to, walls, ceilings, and
I-beams. Mounting hardware is not included with this product. User should identify the mounting surface
and then purchase the appropriate mounting hardware. Recommended hardware by mounting surface:
Dry Wall Mounting:
4x Wall Anchors
4x Dry Wall Screws that will t inside the holes shown on Figure 2.
4x Wood Screws that will t inside the holes shown on Figure 2.
4x Locking Washers
Metal Surface Mounting
4x Metal Screws that will t inside the holes shown on Figure 2.
4x Flat Washers
4x Locking Washers
CAUTION! Before installing, ensure the surface on which the Mount will be installed can support the fully
assembled unit’s weight which includes the mount itself, the access point, and the antenna.
Co- Location Mount Installation Instructions
Figure 1
1. Identify the major parts of the Co-Locating Mount in Figure 1. Refer to it as needed for the
remaining steps.


Produktspecifikationer

Varumärke: Ventev
Kategori: Inte kategoriserad
Modell: TW-HD-MOUNT502

Behöver du hjälp?

Om du behöver hjälp med Ventev TW-HD-MOUNT502 ställ en fråga nedan och andra användare kommer att svara dig