Vestil CYL-2-FF-G Bruksanvisning


Läs gratis den bruksanvisning för Vestil CYL-2-FF-G (9 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Vestil CYL-2-FF-G eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
Table of Contents Rev. 7/24/2024 CYL-2, MANUAL
Table of Contents Copyright 2024 Vestil Manufacturing 1 of 9
CYL-2, CYL-2-FF, CYL-2-FP & CYL-2-FP-FF Cylinder Carts
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete
description of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-manuals.php.
VESTIL MANUFACTURING CO.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestil.com sales@vestil.com
Table of Contents
Page
National Standards…………………………………………………………………………………………...
2
Specifications……………………………………..………………………………………………………………...
2
Signal Words.…………………………………………………………………………………………….…….
3
Safety Instructions.………………………………………………………………..………….………….……
3
CYL-2-FP & CYL-2-FP-FF Exploded View & Bill of Materials…….……………………………….…………..
4
CYL-2 & CYL-2-FF Exploded View & Bill of Materials……………………….………………………...……
5
Using the Cylinder Cart…..…………………………………………………………………………………….
6 - 7
Record of Satisfactory Condition…………………………………………………………………………….
7
Inspecting & Maintaining the Cylinder Cart……………………………………………………….………
7 - 8
Labeling Diagram...………………………………………..………………………………………...……….
8
Limited Warranty...………………………………………………………………………………………………
9
Table of Contents Rev. 7/24/2024 CYL-2, MANUAL
Table of Contents Copyright 2024 Vestil Manufacturing 2 of 9
NATIONAL STANDARDS
This product can be used as either a front end attachment when mounted on the forks of a fork truck,
or a below-the-hook lifter when attached to a hoist or other overhead lifting device.
FRONT END ATTACHMENT
According to US Federal Occupational Safety and Health Administration (OSHA) Rule 1910.178 (29 CFR
1910.178; the Rule”), this device is a front end attachment (for a lift truck) whenever it is mounted on
the forks of a lift truck. The Rule incorporates American National Standard ANSI/ITSDF B56.1 (the
“Standard”) published by the Industrial Truck Standards Development Foundation (ITSDF) on its website
(www.itsdf.org). The standard is freely downloadable at http://www.itsdf.org/cue/b56-standards.html.
Before putting this cart into service, acquire a copy of the Standard. Apply all relevant parts of Part II:
For the User. If instructions provided in this manual conflict with the Standard, then the instructions in the
Standard must be applied. Vestil requests that you immediately inform it about inconsistencies by
contacting TECHNICAL SERVICE personnel. Contact information for TECHNICAL SERVICE appears on the
cover page of this manual.
BELOW-THE-HOOK LIFTING DEVICE
When attached to an overhead lifting device, this product is a Below-the-Hook Lifting Device” (BTH
lifter). ASME standard B30.20 (the Standard”) applies to BTH lifters. Acquire a copy of the latest version
of the Standard before putting the lifter into service. Follow all use and maintenance/care instructions
provided in the Standard as well as all other provisions for owners and users. If content in the manual
conflicts with recommendations or mandatory provisions in the Standard, apply the Standard. Vestil
encourages you to immediately contact TECHNICAL SERVICE if you discover any conflicts.
SPECIFICATIONS
Documents t hat provide specifications for CYL-2 series cylinder carts are available online to anyone who
visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. Navigate to
https://www.vestil.com/product.php?FID=886. Scroll to the Product Specificat ions Table portion of the page.
Find the entry for the cylinder cart you purchased and click the button in the “PDF” column that looks like a
pencil inside a blue-bordered box. A PDF file will open. This file is the specifications document. Print a copy of
the document and keep it with your copy of this manual. The following is an exemplar specifications
document for model CYL-2.


Produktspecifikationer

Varumärke: Vestil
Kategori: ej kategoriserat
Modell: CYL-2-FF-G

Behöver du hjälp?

Om du behöver hjälp med Vestil CYL-2-FF-G ställ en fråga nedan och andra användare kommer att svara dig