Vestil ETS-840-30 Bruksanvisning
Vestil
ej kategoriserat
ETS-840-30
Läs gratis den bruksanvisning för Vestil ETS-840-30 (7 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Vestil ETS-840-30 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
Table of Contents Rev. 11/3/2020 ETS MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 1 of 7
ETS-Series Self-Adjusting Work Tables
Instruction Manual
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If
the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be
contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-manuals.php
.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail:
HUinfo@vestil.comU
Table of Contents Page
Specifications..……………………………………………………………………………………………….…...
2
Signal Words…………....…………………………………………………...……………………………………
2
Safety Instructions……………………………………………………………………………………….............
2 – 3
ETS-230 Exploded View and Bill of Materials………………….………………………………………….…..
3
ETS-460 Exploded View and Bill of Materials…………………………….…………………………….……..
4
Load Chart…….………………………………………………………………………………………….............
5
Using the Table…..…………….…………………………………………………………………………………
5
Record of Satisfactory Condition……………………………………………….……………………………….
6
Inspections & Maintenance….…………………………………………………………………………………..
6
Labeling Diagram……………….…………………………..………………………………………………….…
6
Limited Warranty………………………………………………………………………………………...............
7
Table of Contents Rev. 11/3/2020 ETS MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 2 of 7
SPECIFICATIONS (21-007-100)
Dimensions, capacity, and net weight information appear in the table and diagrams.
SIGNAL WORDS
This manual uses SIGNAL WORDS to indicate the likelihood that a particular action will cause personal injuries
or
property damage. Signal words also specify the level of seriousness of injury if the product is misused in the
ways
described. The following signal words are used in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
Identifies practices likely to result in product/property damage, such as operation that might
damage the ladder.
SAFETY INSTRUCTIONS
Vestil strives to identify all hazards associated with the use of our products. However, material handling is dangerous
and
no manual can address every risk. The most effective means for preventing accidents is for the end-user to
exercise
common sense and sound judgment whenever using this product.
Improper or careless use might result in serious personal injuries.
•
Do not remove, alter, or obscure any label. If a label is damaged or unreadable, replace it. DO NOT use the lifter
until all replacement labels are applied.
•
Do not exceed the capacity of your table! Each table is labeled with its capacity. See Label 287 in LABELING
DIAGRAM on p. 6.
•
The table should never be used with fewer than 4 springs.
•
Center and evenly distribute loads applied to the table.
•
Apply both caster brakes whenever the table is stationary and particularly whenever loads are applied.
•
Do not move the table across sloped terrain while it is loaded.
•
ALWAYS remain uphill of the (unloaded) table whenever moving up or down inclines. If you cannot easily handle
the table, do not attempt to move it by yourself.
•
Keep your hands away from pinch points and openings. Do not reach beneath the table while it is loaded.
Model Capacity
Net
weight
ETS-230
230 lb.
104.5 kg
148 lb.
67.3 kg
ETS-460
460 lb.
209.1 kg
150 lb.
68.2 kg
1” (1in.) = 2.54cm
2.2 lb. = 1kg
Produktspecifikationer
| Varumärke: | Vestil |
| Kategori: | ej kategoriserat |
| Modell: | ETS-840-30 |
Behöver du hjälp?
Om du behöver hjälp med Vestil ETS-840-30 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Vestil Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
ej kategoriserat Manualer
- TSC
- Bolin Technology
- Swissonic
- Narvon
- Omega
- Pelco
- Turbotronic
- Tach-It
- RCA
- Insta360
- ISDT
- Nordlux
- CSL
- Zoll
- BDI
Nyaste ej kategoriserat Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025