Vestil FLB-D-6 Bruksanvisning

Läs gratis den bruksanvisning för Vestil FLB-D-6 (7 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Vestil FLB-D-6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Table of ContentsRev. 12/8/2025 FLB MANUAL

Table of ContentsCopyright 2020 Vestil Manufacturing Company Page 1 of 7

FLB-D Series Fork Mounted Lifting Beams

Receiving Instructions

After delivery, remove the packaging from the product. Inspect the product closely to

determine whether it sustained damage during transport. If damage is discovered, record a

complete description of

iton the bill of lading. If the product is undamaged, discard the

packaging.

NOTE: The end-user is solely responsible for confirming that product design, use, and

maintenance comply with laws, regulations, codes, and mandatory standards applied where

the product is used.

Technical Service & Replacement Parts

For answers to questions not addressed in these instructions and to order replacement parts,

labels,

and accessories, call our Technical Service and Parts Department at (260) 665-7586.

The department

can also be contacted online at https://www.vestil.com/page-parts-

request.php.

Electronic Copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from

https://www.vestil.com/page-manuals.php.

Vestil Manufacturing Company

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or-Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestil.com[email protected]

Table of Contents

Page

Signal Words……………………………………………………..……………………………..……...…

2

Safety Instructions…………………………………..……………………………………..……….……

2

Exploded View and Bill of Materials…………..…………...………………………………………...

3

National Standards…………………………………………………………………………….………..

4

Record of Satisfactory Condition………………………………………………………….…………

4

Loading and Using the Lifting Beam…………………………………………………………………

4– 5

Inspections……………………………………………………………………………………..…………

5

Maintenance……………………………………………………………………………………...………

5– 6

Labeling Diagram………….…………………………………………………………..........................

6

Limited Warranty……...…………………………………………………………………………………

7

Produktspecifikationer