Vestil HPC-20 Bruksanvisning


Läs gratis den bruksanvisning för Vestil HPC-20 (9 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Vestil HPC-20 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
Table of Contents Rev. 3/19/2021 HPC MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Page 1 of 9
HPC-SERIES VERTICAL PLATE CLAMPS
USE AND MAINTENANCE MANUAL
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-
manuals.php.
Table of Contents
Page
Specifications…………………..………………………..……………………………………………...
2
Signal Words….…………………………………………………………………………..…………..…
2
Safety Instructions……………….…………………..………………..………………..…………..…..
3 - 4
National Standards……………………………………………………………………………………...
4
Minimum Uniform Sheet Weight & Uniform Capacity………………………………………..……...
4
Capacity Varies with Sling Angle…………..…………………………………………………………………
4
Operation Parameters…………………………………………………………………………………..
5
Using the Plate Clamp.…………………………………………………….………………...………
5, 6
Record of Satisfactory Condition………………………………………………………………………
7
Load Tests……………………………………………………………………………………………….
7
Inspections & Maintenance……………………………………………………………………….……
7, 8
Labeling Diagram……...……………………….……………………………………………..………...
8
Limited Warranty…...…………………………………………………………..…………..…………..
9
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: info@vestil.com


Produktspecifikationer

Varumärke: Vestil
Kategori: ej kategoriserat
Modell: HPC-20

Behöver du hjälp?

Om du behöver hjälp med Vestil HPC-20 ställ en fråga nedan och andra användare kommer att svara dig