Victron Blue Power IP65 Acculader 6V 12V Bruksanvisning

Victron Batteriladdare Blue Power IP65 Acculader 6V 12V

Läs gratis den bruksanvisning för Victron Blue Power IP65 Acculader 6V 12V (51 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 8.5 recensioner. Har du en fråga om Victron Blue Power IP65 Acculader 6V 12V eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/51
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Användarhandbok
SE
Appendix
Automotive IP65 Charger 6V/12V-1,1A
2
3
EN NL FR DE ES SE
1. Introduction
This charger has been designed for charging a variety of 6V and
12V lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 30Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.
2. Indicator panel
3. Charging modes, safeguards
[1] STANDBY (STANDBY)
Once connected to the mains, the charger automatically resets and
remains in standby mode until activated by pressing the MODE button.
LED
STATE
STANDBY
Standby, or stopped due to bad connection
6V Press MODE button to select 6V battery
12V 12V battery
!
Reverse connection detected, check polarity
CHARGE
LEVEL Charge Level indicator

Produktspecifikationer

Varumärke: Victron
Kategori: Batteriladdare
Modell: Blue Power IP65 Acculader 6V 12V

Behöver du hjälp?

Om du behöver hjälp med Victron Blue Power IP65 Acculader 6V 12V ställ en fråga nedan och andra användare kommer att svara dig