Vitek VT-1752 BK Bruksanvisning

Vitek Värmare VT-1752 BK

Läs gratis den bruksanvisning för Vitek VT-1752 BK (40 sidor) i kategorin Värmare. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 9 recensioner. Har du en fråga om Vitek VT-1752 BK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/40

Тепловентилятор

VT-1752 BK

Fan heater

VT-1752.indd 1 05.06.2012 11:11:58



23 24

VT-1752.indd 2 05.06.2012 11:11:59

ENGLISH

FAN HEATER

Description

1. Base

2. Front grid

3. Display

4. Control panel

5. Carrying handle

6. Inlet filter

7. Inlet filter grid

8. Power cord

9. Tip-over switch

Control panel

10. Oscillation function On/Off button

11. On/Off button

12. Timer/Delayed start On/Off button

13. “Time/temperature decrease/increase” but-

tons «+» «-»

14. Operating mode selection button

Display

15. “ECO” mode icon

16. “Fan” mode icon

17. “Timer/Delayed start” function icon

18. Indoor temperature indication icon

19. “Anti-freeze” mode icon

Remote control

20. On/Off button

21. “Time/temperature decrease/increase” but-

tons «+» «-»

22. “Timer/Delayed start” On/Off button

23. Operating mode selection button

24. Oscillation function On/Off button

ATTENTION!

Always observe the main safety measures when

using electric units as below:

- Read this instruction manual carefully.

- Use the fan heater according to its intended

purpose only.

- Before switching on the unit for the first

time, make sure that the mains voltage

corresponds to the voltage specified on the

unit body.

- The heater must not be located immediately

below a socket-outlet.

- Do not insert the plug into defective or worn-

out sockets.

• In order to avoid fire do not use adapters for

plugging the unit in.

• In order to avoid network overloading, pro-

vide that no other electrical appliances with

higher power consumption are connected

to the same outlet the fan heater is con-

nected to.

• Place the unit on a flat and steady surface.

• Do not place the unit on a soft surface, for

example, sofa or bed.

• The distance between highly inflammable

substances, curtains or furniture etc. and

the front grid of the fan heater must be at

least 0,9 m.

• Avoid blocking the air inlet grid of the fan

heater by any objects or room interior ele-

ments.

• Do not switch the fan heater on in places

where aerosols or highly inflammable liquids

are used.

• Do not cover the fan heater during operation.

• Do not insert any foreign objects into the

grids of the fan heater in order to avoid get-

ting injuries or damaging the unit.

• Do not use the fan heater in a limited space

(for example, in built-in cabinets or wall nich-

es - for tubes defrosting or to prevent them

from freezing).

• Do not use the unit outdoors.

• Do not leave the operating fan heater unat-

tended.

• Do not leave the fan heater switched on

when sleeping.

• Unplug the unit if it is not used.

• Always unplug the unit before cleaning.

• Before removing the plug from the socket

set the operation modes switch to the posi-

tion “OFF”.

• When unplugging the unit, pull the plug but

not the cord.

• Do not touch the power plug with wet hands.

• Do not immerse the unit into water or other

liquids.

• Do not use the unit in bathrooms or in rooms

with high humidity.

• Do not place the unit in places, where it can

fall in a bath or other container, filled with

water.

• If some water gets on the unit body, unplug

it before touching, then wipe the unit with a

dry cloth.

• In order to avoid burns avoid contact of open

body parts with hot surfaces of the grid and

outgoing hot air.

VT-1752.indd 3 05.06.2012 11:11:59

Produktspecifikationer

Varumärke:	Vitek
Kategori:	Värmare
Modell:	VT-1752 BK
Färg på produkten:	Zwart
Vikt:	600 g
Bredd:	129 mm
Djup:	145 mm
Höjd:	54 mm
Vattentät:	Ja
Närmaste fokusavstånd:	2.5 m
Förstoring:	12 x
Objektiv diameter:	42 mm
Ögonlindring:	15.1 mm
Tydligt synfält:	55.3 °
Riktigt synfält:	5 °