Vitek VTD-C410 Bruksanvisning

Vitek Inte kategoriserad VTD-C410

Läs gratis den bruksanvisning för Vitek VTD-C410 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Vitek VTD-C410 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

BLACK

VITEK

VTD-C410

High Resolution Color

Indoor Dome Camera

The VTD-C410 high resolution color dome camera is a

small, attractive camera ideal for use in commercial or

residential applications. It measures less than 5” in

diameter and comes in dual voltage 24 Volt AC/12 Volt

DC power input for easy integration with standard

cameras and power systems.

WIRING CONNECTIONS

The VTD-C410 Dome Camera should be powered by 12 Volts DC or 24 Volts AC. You should

make sure that the power supply you are using is CSA Certified Class 2 Power Supply delivering a

minimum of 2.5 Watts.

For optimum video signal, use 95% copper shielded coax cable. Twisted pair or CAT-5E cable may

also be used with optional VT-TR1M Passive Video Transceivers. Maximum cable distance for 95%

copper braid coax is approximately. 800’; For Cat-5E or twisted pair, 2000’ using VT-TR1M

transceivers.

CAMERA SETUP

DIP SWITCH SETTINGS

Your VTD-C410 Dome Camera has been set at average default settings from the factory so the

performance should be excellent right from the start. However, certain challenging environments

may require additional set-up procedures to enhance the image.

There are four dip switches on the rear board

of the camera. They should all be set to off

from the factory. The following adjustments

may be made:

Dip Switch Adjustments

Electronic Shutter Control

Leave this switch in the “Off” position if your camera has an auto

iris lens.

Switch to the “On” position when using a fixed lens version to

enhance the camera’s ability to react to changing light.

Back Light Control

Leave this switch in the “Off” position if your camera is being

installed outdoors or if the installation is indoors in a controlled

lighting environment.

Switch to “On” position when installing the camera indoors looking

toward windows or doors or if outdoors looking into semi-direct

sunlight. Never install camera looking into direct sunlight.

Flickerless On/Off

Flickerless shutter speed for minimizing image flicker under

fluorescent lighting.

Auto White Balance

Switch “On” if the image appears discolored or floats between

colors. This will enable the camera to find “White”.

Dip Switch 1 =

Dip Switch 2 =

Dip Switch 3 =

Dip Switch 4 =

Produktspecifikationer

Varumärke:	Vitek
Kategori:	Inte kategoriserad
Modell:	VTD-C410
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Bredd:	1500 mm
Djup:	555 mm
Höjd:	800 mm
Snäll:	Muurmontage
Avgasanslutningsdiameter:	150 mm
Antal motorer:	2
Maximal utsugskapacitet:	840 m³/uur
Antal lampor:	5 gloeilamp(en)
Typ lampa:	Halogeen
Soort vetfilter:	Roestvrijstaal
Höjd (min):	800 mm
Höjd (max):	1180 mm
Ljudnivå (hög hastighet:	74 dB
Avtagbart filter:	Ja
Antal filter:	5 stuk(s)
Antal hastigheter:	4
Ljudnivå (medelhastighet):	67 dB
Filter som tål maskindisk:	Ja
Höjd utan skorsten:	350 mm
Inbyggd funktion:	Nee
Strömförbrukning (typiskt):	500 W