Vitek VTD-MD2TCH Bruksanvisning
Vitek
Inte kategoriserad
VTD-MD2TCH
Läs gratis den bruksanvisning för Vitek VTD-MD2TCH (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2.5 recensioner. Har du en fråga om Vitek VTD-MD2TCH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
VITEK
VTD-MD2T7CH
2.1 Megapixel HD-TVI/CVBS
Mini Dome Camera with
2.9mm Fixed Lens
FEATURES:
• 1/3” 2.1 MegaPixel Progressive Scan CMOS Sensor
• HD-TVI & CVBS Video Output
• 2.9mm Lens Included (8 and 16mm also available)
• Digital Wide Dynamic Range (D-WDR)
• 2D-DNR - Two Dimensional Motion Adaptive Noise Reduction
• Detachable External OSD Joystick Controller
• Advanced OSD Functions: BLC/HLC, D-WDR, Motion
detection, Privacy mask, Flip, DeFog
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• Can be Semi-Flush or Surface Mounted
• IP-66 Rated Weather Resistant Aluminum Enclosure w/
Polished Chrome Finish
• 12VDC Operation
1
INSTALLATION
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cables from the
camera unit through the cable hole
in the ceiling.
4) Align the three screw holes in the
camera unit with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws.
5) Use the supplied four screws to
secure the middle base to the
bottom base.
6) Tighten the guide ring, then
adjustment the camera.
7) Attach the bubble to the middle
base.
8) Attach the top cover to the middle
base.
9) Use the supplied star-shaded
L-wrench to tighten the set screw on
the top cover.
Open Close
A)
B)
C)
D)
A) White BNC: CVBS
B) Yellow BNC: HD-TVI
C) Black: OSD Connector
D) Red: Power Connector
2
OSD MENU
LENS MANUAL DC
FOCUS ADJ ON/OFF
EXPOSURE BRIGHTNESS SHUTTER TCS SENS-UP AGC
BACKLIGHT WDR BLC HLC
DAY & NIGHT AUTO EXTERN B&W COLOR
WHITE BAL AWB MANUAL PRESET AUTOEXT
DNR OFF LOW MIDDLE HIGH
IMAGE SHARPNESS GAMMA MIRROR FLIP ACE DEFOG
PRIVACY
MOTION DET WIN DET TONE MDRECT SEN MOTION OSD
TEXT SIG OUT
OPTION COM IMAGE RANGE COLOR FRAME FREQ TVI
COLOR BAR LANGUAGE CAM TITLE VERSION
SELECTION OPTIONS
• The setup menu can
be accessed and
controlled by the
Detachable External
OSD control joy stick.
Produktspecifikationer
| Varumärke: | Vitek |
| Kategori: | Inte kategoriserad |
| Modell: | VTD-MD2TCH |
Behöver du hjälp?
Om du behöver hjälp med Vitek VTD-MD2TCH ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vitek Manualer
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
Inte kategoriserad Manualer
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025