Vortex Viper HD 10x50 Bruksanvisning

Vortex Kikare Viper HD 10x50

Läs gratis den bruksanvisning för Vortex Viper HD 10x50 (7 sidor) i kategorin Kikare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Vortex Viper HD 10x50 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
2
Ocular Lens
Strap
Attachment
Locking
Diopter
Center Focus
Reticle Focus
Twist-up Eyecup
Tripod Adapter Socket Objective Lens
4
Properly Focus the Binocular
For the best views, follow this two-step process to properly adjust
the center focus and diopter. Choose an object about 20 yards
away and stay in the same spot until you have adjusted the
binocular for your eyes.
1. Adjust the center focus. Start by closing
your right eye or covering the right
objective lens with your hand. Focus
your left eye on the object and adjust
the center focus wheel until the image
is in focus. Leave the center focus in
this position as you adjust the diopter.
2. Adjust the diopter. Start by closing your
left eye or covering the left objective
lens with your hand. Look through
your right eye, pull the diopter ring
(found on the right eyepiece) toward
your eye, adjusting the diopter until
the object is in focus. Then, push the
diopter ring back down to lock your
settings. Make note of this diopter
setting in case you need to set it again. From this point on, you
will only need to use the center focus wheel.

Produktspecifikationer

Varumärke: Vortex
Kategori: Kikare
Modell: Viper HD 10x50

Behöver du hjälp?

Om du behöver hjälp med Vortex Viper HD 10x50 ställ en fråga nedan och andra användare kommer att svara dig