VTech VC7003 Bruksanvisning
VTech
övervakningskamera
VC7003
Läs gratis den bruksanvisning för VTech VC7003 (2 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om VTech VC7003 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Congratulations
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
This manual has instructions on how to
set up and register your new sensor. For
instructions on sensor settings, see the
user’s manual that came with your ULE
compatible products. Visit
www.vtechcanada.com for a list of the
latest ULE compatible products.
You may also view or download the online
User’s manual of the respective product
for a full set of installation and operation
instructions at www.vtechcanada.com.
What’s in the box
Your product package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Motion Sensor overview
1 – Screw cover
Slide to open or close the screw cover
to reveal the battery compartment
case and PAIRING button.
2 – Back cover
3 – LED light
Briefly flashes red when the sensor is
first powered on.
Flash red once, when motion is
detected.
Flashes green when the sensor is in
registration mode.
4 – Motion detector
5 – PAIRING button
Press and hold to enter the
registration mode.
6 – Battery compartment case
•
•
•
•
•
Before use
Open the battery compartment case
Slide to open the screw cover and
unscrew the screw until the battery
compartment case is separable from the
back cover.
Separate the battery compartment case
from the back cover.
Install Motion Sensor Battery
NOTES
Use only CR123A Lithium Battery.
When inserting battery, ensure polarities are
correct.
For proper operation, use battery within the
following temperature range: 0°F (-18°C) and
120°F (49°C).
Pull the ribbon tightly across the battery
compartment.
Insert the battery into the battery
compartment.
Add and register a sensor
Your new VC7003 Motion Sensor can be
registered to any ULE compatible product
Register each sensor individually to the
respective ULE compatible product before
use.
1.
2.
•
•
•
1.
2.
Register a Motion Sensor:
If you have just inserted the battery,
wait for the red LED to stop flashing.
Enter the registration mode by selecting
the option for adding a sensor to your
ULE compatible product. Refer to the
user’s manual of your ULE compatible
product for more detailed instructions.
Use a narrow pointed object such as
a pen to press and hold the PAIRING
button on the Motion Sensor, until the
LED light at the front side flashes green.
The sensor is now registering to the
ULE compatible product.
The registration process takes about 90
seconds to complete. When this registration
process completes, the green LED light
on the sensor will remain steadily on for
approximately two seconds then, will turn off.
If registration fails, remove battery from the
sensor and wait for a few seconds. Then,
re-install battery and wait until the red LED
stops flashing. After that, begin registration
process again.
NOTES
You can also download online User’s manuals at
www.vtechcanada.com.
If you are going to mount the sensor with screws or
mounting bracket, the back cover has to be mounted
before you assemble the battery compartment
case back to it (see Mount the sensor).
Replacing a sensor
If you have purchased this new VC7003
accessory sensor to replace an old sensor,
you must deregister the registered sensor
first, and then register this new sensor to your
ULE compatible product.
Deregister a sensor or all sensors:
Refer to the User’s manual of your ULE
compatible products to deregister a sensor
or all sensors.
1.
2.
3.
•
•
•
Motion detection
The Motion Sensor detects motion with
one-minute cool off time. Once motion is
detected, the sensor will start detecting
motions again only after one minute.
The Motion Sensor is more sensitive in
detecting motions crossing the space in front
of the sensor than that moving towards the
sensor.
The Motion Sensor can detect motion
occurring at distances up to 40 feet (12
meters) when it is mounted at a height of 7.9
feet (2.4 meters).
It is recommended to mount the sensor at the
height between 6.2 feet (1.9 meters) and 7.5 feet
(2.3 meters) for optimal detection coverage.
For motion detection of babies or pets:
If you use the Motion Sensor only to detect
the motion of babies or pets, you can mount
the sensor at a lower position to shorten
the minimum distance before reaching the
detection area. It is recommended to mount
it at the height 3.3 feet (1 meters) for optimal
detection of babies and pets.
NOTE
The numerical values in the illustrations are for
conceptual reference only. The actual angles
and distances may vary upon the change in the
mounted height of the sensor.
•
Check the sensor before use
1. Place the sensor about 3.3 feet (1 meter)
from the ULE compatible product.
2. Waive your hand or walk across the area
in front of the sensor.
You will receive alerts at your ULE
compatible product. Refer to the
Installation guide or user’s manual of
your ULE compatible product for the
sensor alerts.
The LED light on the Motion Sensor will
flash red once.
NOTE
Once motion is detected, the sensor will only
start to detect motion again after one minute.
When you have received alerts already, you will
only receive alerts again for motion detected
after one minute.
•
•
•
Test the sensor signal strength
You can mount the Motion Sensor at a
location where family members or unwanted
visitors are likely to be coming and going.
1. Take the sensor to the desired mounting
location and then, hold it at the desired
height (Refer to Motion detection
section). Use adhesive tape to hold the
sensor temporarily in place.
2. Enter the signal checking or testing mode
at your ULE compatible product to test the
sensor signal strength.
3. Waive your hand or walk across the area
in front of the sensor again and check
whether a good signal is received at your
ULE compatible product.
NOTES
Once motion is detected, the sensor will only
start to detect motion again after one minute.
When you have received alerts already, you will
only receive alerts again for motion detected
after one minute.
If there is no alert received when you walk
across the area in front of the sensor, move
your ULE compatible product closer to the
mounting location or move the sensor closer to
the respective product.
Depending on surroundings and obstructing
factors, like walls or cabinets, the sensor may
not transmit to the ULE compatible product
properly.
•
•
•
VC7003
Accessory Motion Sensor
for use with
ULE certified systems*
Motion Sensor
Mounting bracket
on mounting base
with screw
Lithium battery
Mount the sensor
NOTES
This sensor must be mounted vertically on wall. Do not mount the Motion Sensor in a horizontal
orientation, or flat on the ceiling.
Make sure the mounting surface is clean. A textured surface or any imperfections to a smooth surface
can keep the mounting tape from making a strong bond.
This device detects or performs better when provided with a constant and stable environment.
Avoid placing the sensor at a location which faces direct sunlight, or exposes to areas that may change
temperature rapidly, or where there are air ducts or substantial airflows.
The recommended mounting height for motion detection of adults is between 6.2 feet (1.9 meters) and
7.5 feet (2.3 meters), and that for babies or pets is about 3.3 feet (1 meter).
If you drill the holes into an object other than a stud, insert the screw anchors into the holes and tap
gently on the ends with a hammer until the screw anchors are flush with the wall or ceiling.
TIP
You can choose to mount the sensor with the mounting tape first. Remove the mounting tape and use
screws later if you decide to mount it at that location for long term.
•
•
•
•
•
•
User’s
manual
User’s manual
2 3
4
1
Screw for
mounting
brackets x 2
Screw for
back cover x 3
Mount on the wall - with fixed angle
Mount on the wall - with rotated detection angle
1
2 3
5
P
P
a
b
i
k
l
m
c
d
e
f
g
h
j
n
o
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
(Optional)
Insert screw
anchors if
necessary.
*
Visit www.vtechcanada.com for the latest ULE compatible products.
Anchor for
back cover x 3
Anchor for
mounting
brackets x 2
Double-sided
mounting tape
Mount with tape
Mount on the wall - with fixed angle
Mount with screws
4 5
2
3
1
Drill a hole
here.
Up to 34.4 feet
(10.5 meters)
Side view
Detection
area
78
o
Top view
Shooting area
19.7 inches
60 degrees
22.8 inches
Shooting area
19.7
inches
50 degrees
18.3
inches
63 inches
87
o
Detection area
1.3 feet
(0.4 meter)
10
o
Height: 6.9 feet (2.1 meters)
Height: 6.9 feet (2.1 meters)
Side view
Detection
area
78
o
Top view
87
o
Detection area
0.7 feet
(0.2 meter)
10
o
Height: 3.3 feet (1 meter)
Up to 16.4 feet
(5 meters)
Height: 3.3 feet (1 meter)
TIP
You can rotate the sensor 45 degree, and then mount the sensor next to the corner of wall for optimal
detection coverage.
•
NOTE
This product requires professional installation.•
2
1
This screw should only
be fully secured after you
adjusted the angle.
Unscrew first.
4
5 6 7
Tighten the screws after
you slided the sensor
over them.
(Optional)
Insert screw
anchors if
necessary.
Tighten
the scew.
Tighten
the scew.
Tighten
the scew.
2
1
Go to www.vtechcanada.com
to register your product for
enhanced warranty support and
the latest VTech product news.
User’s manual
(Canada version)
General product care
Taking care of your sensor
Your sensor contains sophisticated electronic
parts, so it must be treated with care.
Avoid rough treatment
Place the sensor down gently. Save the original
packing materials to protect your sensor if you
ever need to ship it.
Avoid water
Your sensor can be damaged if it gets wet. Do
not use the sensor outdoors in the rain, or handle
it with wet hands. Do not install the sensor near a
sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your sensor
Your sensor has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Storage
When you are not going to use the sensor for
some time, remove the battery from the sensor.
Store the sensor in a cool and dry place.
Frequently asked questions
Below are the questions most frequently asked
about the sensor. If you cannot find the answer
to your question, visit our website at
www.vtechcanada.com or call 1-800-267-7377 for
customer service.
The sensor
does not
work at all.
Make sure the CR123A lithium
battery is installed.
The sensor may be deregistered
from the telephone base. Register
it back to your ULE compatible
product.
The sensor may be out of range.
Move the sensor closer to your
ULE compatible product.
Important safety instructions
When using your equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the
following:
Adult setup is required.
This product requires professional installation in
accordance with UL 681.
Do not use this product near water. For
example, do not use it next to a bath tub, wash
bowl, kitchen sink, laundry tub or swimming
pool, or in a wet basement or shower.
Do not place this product on unstable shelves,
stands, tables or other surfaces.
This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator
or heat register.
Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short circuit.
Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorized service facility. Opening or removing
parts of the product other than specified access
doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently
used.
1.
2.
3.
4.
5.
6.
7.
Periodically examine all components for
damage.
Children should be supervised to ensure that
they do not play with the product.
The product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Battery
CAUTION: Use only the battery indicated in this
manual. There may be a risk of explosion if a
wrong type of battery is used for the sensor unit.
Do not dispose of the battery in a fire. Check
with local waste management codes for special
disposal instructions.
Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause burns or
injury to the eyes or skin. The electrolyte may be
toxic if swallowed.
Exercise care in handling battery in order not to
create a short circuit with conductive materials.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless devices):
Wireless Technology Research, LLC (WTR), an
independent research entity, led a multidisciplinary
evaluation of the interference between portable
wireless devices and implanted cardiac
pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians
that:
Pacemaker patients
Should keep wireless devices at least six inches
from the pacemaker.
Should NOT place wireless devices directly over
the pacemaker, such as in a breast pocket, when
it is turned ON.
WTR’s evaluation did not identify any risk to
bystanders with pacemakers from other persons
using wireless devices.
8.
9.
10.
•
•
•
•
•
•
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply
with the requirements for a Class B digital device
under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are
intended to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
To ensure safety of users, the FCC has established
criteria for the amount of radio frequency energy
that can be safely absorbed by a user or bystander
according to the intended usage of the product. This
product has been tested and found to comply with
the FCC criteria. The sensor unit shall be installed
and used such that parts of all persons’ body are
maintained at a distance of approximately 8 in
(20 cm) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
•
•
•
•
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
The term ‘’IC:‘’ before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
This product meets the applicable Industry Canada
technical specifications.
RF radiation exposure statement
The sensor complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. The sensor unit should be installed
and operated with a minimum distance of 8 in (20
cm) between the sensor and all persons’ body. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies also with Industry Canada
RSS-102 with respect to Canada’s Health Code 6
for Exposure of Humans to RF Fields.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material and
workmanship, pursuant to the following terms
and conditions, when installed and used normally
and in accordance with the Product operating
instructions. This limited warranty extends only to
the Consumer for Products purchased and used in
the United States of America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace the
Product, we may replace it with a new or refurbished
Product of the same or similar design. We will
retain defective parts, modules, or equipment.
Repair or replacement of the Product, at VTech’s
option, is your exclusive remedy. VTech will return
the repaired or replacement Products to you in
working condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase. If
VTech repairs or replaces a Materially Defective
Product under the terms of this limited warranty,
this limited warranty also applies to the repaired
or replacement Product for a period of either (a)
90 days from the date the repaired or replacement
Product is shipped to you or (b) the time remaining on
the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or
other liquid intrusion; or
Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech;
or
Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna systems;
or
Product to the extent that the problem is caused
by use with non-VTech accessories; or
Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible; or
Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited
to Products used for rental purposes); or
Product returned without a valid proof of
purchase (see item 2 on the next column); or
Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service, please visit our website
at www.vtechcanada.com or call 1-800-267-7377.
NOTE: Before calling for service, please review the
user’s manual - a check of the Product’s controls
and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery or
handling charges incurred in the transport of the
Product(s) to the service location. VTech will return
repaired or replaced Product under this limited
warranty. Transportation, delivery or handling
charges are prepaid. VTech assumes no risk for
1.
2.
3.
4.
5.
6.
7.
8.
damage or loss of the Product in transit. If the
Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of
this limited warranty, VTech will notify you and will
request that you authorize the cost of repair prior to
any further repair activity. You must pay for the cost
of repair and return shipping costs for the repair of
Products that are not covered by this limited warranty.
What must you return with the Product to get
warranty service?
Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications related to
this Product. VTech provides no other warranties for
this Product. The warranty exclusively describes all
of VTech’s responsibilities regarding the Product.
There are no other express warranties. No one
is authorized to make modifications to this limited
warranty and you should not rely on any such
modification.
State/Provincial Law Rights: This warranty gives you
specific legal rights, and you may also have other
rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the date
of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. In no
event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue,
inability to use the Product or other associated
equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use of this
Product. Some states/provinces do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may
not apply to you.
Please retain your original sales
receipt as proof of purchase.
1.
2.
3.
Technical specifications
Frequency control Crystal controlled PLL
synthesizer
Transmit frequency 1921.536-1928.448 MHz
Channels 5
Sensor operating
temperature
0°F (-18°C) to 120°F (49°C)
Nominal effective
range
Maximum power allowed
by FCC and IC. Actual
operating range may vary
according to environment
conditions at the time of use.
Power requirements Battery: Lithium 3V
Battery type: CR123A
Battery size: 2/3A
Disclaimer
This product is not designed for security purposes.
When properly installed and maintained, this product
may in some cases reduce the risk of burglary, fire,
robbery or other events occurring without providing
an alarm. VTech is not responsible for losses, injury,
or damage resulting from the use of this product.
This product is covered by U.S. Patent #8,825,043.
Other patents may be pending.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
Copyright © 2016 for VTech Technologies Canada Ltd.
All rights reserved. 04/16. VC7003_CA_CIB_V2.0
Document order number: PN# 89330001
Designed to fit your home.
And your life.
Produktspecifikationer
| Varumärke: | VTech |
| Kategori: | övervakningskamera |
| Modell: | VC7003 |
Behöver du hjälp?
Om du behöver hjälp med VTech VC7003 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera VTech Manualer
15 Juni 2025
14 December 2024
14 December 2024
31 Juli 2024
övervakningskamera Manualer
Nyaste övervakningskamera Manualer
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025