Waring Commercial MX1500XTX Bruksanvisning

Waring Commercial Blandare MX1500XTX

Läs gratis den bruksanvisning för Waring Commercial MX1500XTX (19 sidor) i kategorin Blandare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Waring Commercial MX1500XTX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/19

Hi-Power Blenders

Licuadoras de alta potencia

Mélangeurs/Bols mixeurs à haute puissance

MX1300XTX/MX1300XTP/MX1300XTS

MX1500XTX/MX1500XTP/MX1500XTS

OPERATING MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D'UTILISATION

2 3

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock, do not put appliance in

water or other liquid.

3. Always unplug from outlet prior to handling or cleaning.

4. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

5. Unplug from outlet when not in use, before putting on or taking off

parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate the Waring® Blender or any other electrical

equipment with a damaged cord or plug, or after the unit

malfunctions, or is dropped or damaged in any manner. Return

it to the nearest authorized service facility for examination, repair,

or adjustment.

8. The use of attachments, including canning jars, not recommended

or sold by Waring may cause re, electric shock, or injury.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter, or touch hot

surfaces.

11. Keep hands and utensils out of jar while blending, to prevent the

possibility of severe personal injury and/or damage to the blender.

A rubber spatula may be used, but must be used only when the

blender is not running.

12. Blade is sharp. Handle carefully.CAUTION:

13. Always operate blender with lid in place.

14. When blending hot liquids, remove center piece of two-piece cover.

See hot blending instructions, page 8.

15. The use of ear protection is recommended during extended

operating periods.

16. Do not leave blender unattended while it is running.

17. See cleaning and sanitizing instructions, pages 9-11.

NOT FOR WATERJET CLEANING.

SAVE THESE INSTRUCTIONS

1. Power On/Off Button - Pressing this button will turn the blender on and

off. When the unit is turned on, the blue LCD backlight will illuminate and will

prompt user when the machine is ready for blending.

2. Start/Stop Button - Pressing this button once while in standby mode will

cause the blender to run. Pressing this button again will stop the blender

from running. The blender should not be run without a container or NOTE:

with an empty container.

3. Speed Controls - Gradually increase or decrease the blending speed

of the blender in 1% increments. The speeds range from 15% to 100%.

The speed controls can also set the speed of the Norm Pulse function.

NOTE: Speed settings will be saved when unit is turned off.

4. Maximum Pulse Control - Pressing this button provides a quick burst of

speed during a blending cycle. The MAX Pulse button will run the blender at

150% power (30,000 RPMs).

5. Normal Pulse Control - Pressing this button provides a quick burst of

speed during blending cycles at speeds of less than 100%. The Norm Pulse

button will run the blender at 100% power (20,000 RPMs).

6. LCD Display - This window will display all operating messages with a

sharp blue LCD backlight.

7. Program Buttons for Pre-set Beverage Stations - The blender comes

with 4 preprogrammed beverage stations. These stations consist of the

most frequently blended kinds of drinks. All stations are reprogrammable to

accommodate the user’s preferences. See page 6 for details on this feature.

CONTROL PANEL

4 5

GROUNDING INSTRUCTIONS

• Foryourprotection,Waring® blenders are equipped with a 3-conductor

cordset having a molded 3-prong grounding-type plug, and should be

used in combination with a properly connected grounding-type outlet as

showninFigureA.Ifagrounding-typeoutletisnotavailable,anadapter,

asshowninFigureB,maybeusedtoenablea2-slotwalloutlettobe

used with a 3-prong plug.*

 AsshowninFigureC,theadaptermustbegroundedbyattachingits

grounding lug under the screw of the outlet cover plate.

 CAUTION:Beforeusinganadapter,itmustbedeterminedthatthe

outletcoverplatescrewisproperlygrounded.Ifindoubt,consulta

licensed electrician.

Never use an adapter unless you are sure it is properly grounded.

*NOTE: Use of an adapter is not permitted in Canada.

NOTE: User-installed cord set plugs are not permitted in Europe.

MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS

BLENDER SPECIFICATIONS

•Capacity:64oz.WorkingCapacity(48oz.capacitywithMX1300XTP&

MX1500XTP versions)

•SwitchSettings:Reprogrammable

•VariableMotorSpeed:Minimum3,000RPMs/Maximum20,000RPMs

(30,000 RPM with Pulse)

•Rating:120Volts-13.0Amps

•BaseMaterial:Polycarbonate

•PolycarbonateSoundEnclosureincludedwithMX1500XTX/MX1500XTP/

MX1500XTS versions only

•Bearing:HighPrecisionBallBearing

•Cord:6-FootThree-ConductorGroundCorewithStrainReliefinBase

•OverallHeight:21Inches

• OperatingCycle:1minuteON/3minutesOFF

•Weight:18lbs

• ,NSFlistedcETLus

OPERATION

 1. PlugthepowercordintoACoutlet.PresstheOn/Off button to

turn the unit on. The blue LCD backlight will turn on and the words

WARINGCOMMERCIALwillappear,indicatingthatthepowerison.

After 5 seconds, the blender enters standby mode.

NOTE:Instandbymode,theblenderisawaitingdirectionsandwillread

PRESSANYBUTTONTOBLEND.

2. The motor speed can be adjusted by pressing the or Speed

buttons. Speed ranges from 15% to 100%.

100% 20,000 RPMs

50% 10,000 RPMs

15% 3,000 RPMs

The Speed Up button will increase the motor speed display in 1%

increments and the Speed Down button will decrease the motor

speeddisplayin1%increments.Holdingdowneitherbuttonwillquickly

scroll through speeds.

Using the Speed Up and Speed Down buttons, set desired motor

speed.Ifnospeedisselected,motorwilldefaultto100%.

NOTE:ThemotordoesnotrunatthenewlysetspeeduntiltheStart/

Stop buttonispressed.IfStart/Stop button is not pressed

within5seconds,thenewspeedsettingwillbestoredfornextuseand

the blender will return to standby mode; the display will once again read

PRESSANYBUTTONTOBLEND.

 3. PressStart/Stop buttontoturntheblenderon.Blenderwillrun

continuously at the set speed. The LCD will display the motor speed in

percentage. Default speed (percentage) is at 100%. Motor speed can be

changed while blender is running by simply pressing Speed Up or

Speed Down button.

 4. Tostopcontinuousblendingoperation,pressStart/Stop button or

press any of the program buttons.

PULSE FEATURES

Your unit comes equipped with two Pulse options: Normal Pulse and

MaximumPulse . The Pulse buttons are momentary switches – Note:

once released, the unit will shut off.

 1. TouseMaxpulseoption,pressthe button. This will run the motor

at 150% speed. The LCD will read MAX PULSE SPEED: 150%.

2. To use Normal pulse option, press the button. This will run the motor

at100%speed.TheLCDwillreadNORMPULSESPEED:100%.

3. The blender allows you to set the pulse to your desired speed. While

blending at Normal pulse speed, the motor can be adjusted. To do this,

hold the Pulse button and press Speed Up or Speed Down

Produktspecifikationer

Varumärke:	Waring Commercial
Kategori:	Blandare
Modell:	MX1500XTX
Enhetsplacering:	Vrijstaand
Färg på produkten:	Roestvrijstaal
Dörrgångjärn:	Rechts
Inbyggd display:	Ja
Vikt:	120000 g
Bredd:	704 mm
Djup:	749 mm
Höjd:	1955 mm
Nettoskatt:	127 W
Ismaskin:	Ja
Sladdlängd:	1.8 m
Ljudnivå:	41 dB
Energie-efficiëntieklasse:	E
Årlig-energiförbrukning:	285 kWu
Förpackningens vikt:	133800 g
Frys nettokapacitet:	137 l
Fryskapacitet:	8 kg/24u
Kylskåpets nettokapacitet:	344 l
No Frost (kylskåp):	Ja
Kylskåp invändig belysning:	Ja
Typ av lampa:	LED
Multi-luftvägssystem (kylskåp):	Ja
Antal hyllor i kylskåp:	3
Antal-grönsakslådor:	1
Frysläge:	Onder
No Frost (frys):	Ja
Retentionstid vid strömavbrott:	14 uur
Snabbfrysfunktion:	Ja
Antal fryshyllor:	4
Total nettokapacitet:	481 l
Temperaturlarm:	Ja
Automatisk avfrostning (kylskåp):	Ja
Hyllmaterial:	Glas
Kylskåpsdörrfickor:	4
Till fackområdet:	Ja
Larm för öppen dörr:	Ja
Antal kompressorer:	1
Lägsta drifttemperatur:	10 °C
Maximal temperatur (drift):	43 °C
Klimaatklasse:	SN-T
Automatisk avfrostning (frys):	Ja
Bulleremissionsklass:	C
Inverterteknik:	Ja
Plats för visning:	Binnenin
Ursprungsland:	Italië
Djup utan handtag:	704 mm
Djup när dörren är öppen:	1356 mm
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50/60 Hz
Energieffektivitetsskala:	A tot G
Kemisk belastning (Sverige):	Ja
Reduktion av kemisk belastning (Sverige):	50