WMD Subway Bruksanvisning

Läs gratis den bruksanvisning för WMD Subway (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 8 recensioner. Har du en fråga om WMD Subway eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
AN (Knob & CV Input): Scans
rough the inputs that are
abled. The potentiometer
comes an attenuator when a CV
applied to the jack.
OUT (Jack & LED): Output of t
the crossfader. Bicolor LED
bipolar signals.
SUBWAY
8 INPUT 1 OUTPUT SCANNING CROSSFADER
INPUTS: DC coupled inputs for
the signals you would like to scan
through.
ENABLES: Buttons that enable and
disable the associated input. When
an input is disabled the signal will
be removed from the scanning
crossfade.
SPECS:
Size: 6hp
Depth: 38mm (with cables)
Power: +80mA, -22mA
100k ohm input/CV impedance
1k ohm output impedance
20Vpp range
Memory:
Front panel settings save to
EEPROM 1 minute after last button
press.
Digitally controlled analog signal
path operates at 48kHz
FADE CURVES: Subway has 3
selectable crossfade curves.
Choose a curve by holding one of
the following buttons on startup:
1. Linear
2. Exponential
3. Equal Power
Subway is the intelligent crossfader for multiple signals that we never knew we needed. Eight
inputs that can all be crossfaded transparently in analog by a smart digital control interface.
The uses for Subway are endless. Dramatically increase the timbral possiblities of your os-
cillator(s) or turn any module with multiple outputs into a continuously crossfading system.
Subway will nd plenty of uses in your rack.

Produktspecifikationer

Varumärke: WMD
Kategori: Inte kategoriserad
Modell: Subway

Behöver du hjälp?

Om du behöver hjälp med WMD Subway ställ en fråga nedan och andra användare kommer att svara dig