Xiaomi ZI5 Ni-MH Battery Fast Charger Bruksanvisning
Xiaomi
Batteriladdare
ZI5 Ni-MH Battery Fast Charger
Läs gratis den bruksanvisning för Xiaomi ZI5 Ni-MH Battery Fast Charger (7 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 12.5 recensioner. Har du en fråga om Xiaomi ZI5 Ni-MH Battery Fast Charger eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
ZI5 Ni-MH Battery Charger
Thank you for your choice! Read the instructions carefully before using the
device.
Precautionary measures
Do not cover the device during charging.
Do not charge incompatible batteries.
For optimum performance, use ZI5 / ZI7 Ni MH batteries or Panasonic
eneloop Ni MH batteries.
Do not touch the device with wet hands.
Do not immerse the device in water, do not spray water or snow, do not
use it in a humid room (for example, in a bathroom).
Disconnect the device from a power supply after use.
In case of hit, falling or damage to the device, do not use it.
Do not disassemble or modify your device.
Do not use the device in direct sunlight.
Specications
Model: РВ400;
Input voltage: 5.0V / 1.0A;
Output voltage: 5.0V / 0.5A;
(AA) 1.5V AA: 550mA x 4;
(AAA) 1.5V AA: 225mA x 4;
Dimensions: 77 x 63 x 24.5mm;
Operating temperature: 0-40 ° С.
Overview of ZI5 Ni-MH Battery Charger
USB (output)
Micro USB (input)
Charge / discharge switch
Mode switch (Input - for charging the battery, Output - for charging external
portable devices)
LED indicators
Positive pole (anode)
АА Negative pole
(cathode)
ААА Negative pole
(cathode)
Charging
Switching the button to the Input side, charge nickel AA and AAA batteries
(any combination).
1. Ensure that anode and cathode of a battery are in proper contact with
anode and cathode of the device. Insert batteries into the device in the
direction, shown at the picture.
Installing AA battery
Installing AAA battery
2. Recharge batteries by connecting the Micro USB port of the device to a
5V DC power supply.
3. Slowly ashing LEDs indicates a normal charging process; A constantly
lit LEDs indicates that the battery is fully charged.
In the following table you will nd general information about the duration
of recharging. This data can vary depending on temperature and current
state of a battery.
The above-mentioned charging time of a batteries is accounted on the input
voltage of 5V / 1A, from 0% to 100% of charging of batteries. The charging
time depends on a level of remaining charge and an ambient temperature.
If you add another battery to the device (when charging a batteries), a
charging time increases.
It is possible after the battery is completely recharged, if a battery has not
been removed from the device in time, an indicator will light up again and
the device will re-charge it. To determine that a battery is fully charged and
to stop a power supply, the device needs a certain amount of time. This
does not indicate a malfunction of the battery charger or battery.
Status of LED indicators
Produktspecifikationer
| Varumärke: | Xiaomi |
| Kategori: | Batteriladdare |
| Modell: | ZI5 Ni-MH Battery Fast Charger |
Behöver du hjälp?
Om du behöver hjälp med Xiaomi ZI5 Ni-MH Battery Fast Charger ställ en fråga nedan och andra användare kommer att svara dig
Batteriladdare Xiaomi Manualer
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
Batteriladdare Manualer
- Roav
- Scosche
- Hema
- IEB
- Uniross
- Davis
- Mean Well
- Sennheiser
- Mestic
- Rictron
- Fronius
- Snooper
- HyCell
- Powerplus
- Audio-Technica
Nyaste Batteriladdare Manualer
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
12 Juni 2025
9 April 2025
9 April 2025
9 April 2025
3 April 2025