Zebra QLn320 Bruksanvisning

Zebra Skrivare QLn320

Läs nedan 📖 manual på svenska för Zebra QLn320 (12 sidor) i kategorin Skrivare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
1
Introduction
Battery Install &
Charging
Media Loading
Connect Printer/
Printer Controls
Cleaning and
Troubleshooting
Accessories and
Contact Info
QLn Series User Guide
www.zebra.com/manuals.
QLn320 QLn220
Media width:
1.0 in. to 3.125 in.
(25,4 mm to 79,4 mm)
Media width:
.63 in. to 2.18 in.
(16 mm to 55,37 mm)
Printer Dimensions
H: 6.85 in. (173,659 mm)*
W: 4.65 in.(117,856 mm)
D: 3.15 in (76,9 mm)
* with belt clip
Printer Dimension
H: 6.73 in. (170,9 mm)*
W: 3.60 in. (91,4 mm)
D: 2.75 in. (69,9 mm)
* with belt clip
Always refer to the Important Safety Information data
sheet shipped with each printer and the Technical Bulletin
shipped with each battery pack. These documents detail
procedures to ensure maximum reliability and safety while
using this printer.
© ZIH Corp 2011
P1031679-002 Rev. A
1. Platen Roller
2. Bar Sensor
3. Media Support Disks
4. Tear Bar
5. Label Present Sensor
6. Peeler Lever
7. Peeler Bail
8. Latch Release Lever
9. Keypad
10. Strap Post
11. LCD Screen
12. Printhead
13. Media Cover
14. Gap Sensor
15. Power Button
16. Feed Button
17. LED Charge Indicator
2
8
6
7
12
10
13
14
1
11
5
4
3
17
1615
2
Introduction
Battery Install &
Charging
Media Loading
Connect Printer/
Printer Controls
Cleaning and
Troubleshooting
Accessories and
Contact Info
19
18
21
18. Belt Clip
19. Battery
20. USB/RS232 Comm Ports
21. MAC Address Label
22. Docking Contacts
23. DC Input
20
Rotate the Belt Clip out of the
way of the Battery
QLn Series Smart
Battery
23
22
3
Introduction
Battery Install &
Charging
Media Loading
Connect Printer/
Printer Controls
Cleaning and Trouble-
shooting
Accessories and
Contact Info
UCLI72-4 Quad Charger
Fault
Fast Charge
Fault
Fast Charge
Fault
Fast Charge
Ready
Power
Full Charge
Ready
Full Charge
Ready
Full Charge
Full Charge
Fault
Fast Charge
Ready
Charger Bay
Amber
Indicator
Green
Indicator Power Indicator
Power Supply
2. Slide Battery Pack
into Charger bay
3. Rock Battery Pack
into place
Amber Green Battery Status
On O Charging
On Flashing 80% charged (O.K.
to use)
O On Completely
Charged
Flashing O Fault
1. Plug Power Supply
into A.C. Outlet.
Smart Charger-2 (SC2) Single Battery Charger
Battery
Pack
Charge Status
LED Indicator
When the SC2 is plugged in but no battery is present, the Charge Status LED
indicator will be green.
QLn Series User Guide www.zebra.com/manuals
Health Status
LED Indicator
The charge state of the QLn Series battery is reected by the LED Charge
Indicator located on the front of printer (as illustrated in the Printer Controls
section on Page 8).
Caution • Do not incinerate, disassemble, short circuit, or expose to
temperatures higher than 60
oC (140oF).

Produktspecifikationer

Varumärke: Zebra
Kategori: Skrivare
Modell: QLn320

Behöver du hjälp?

Om du behöver hjälp med Zebra QLn320 ställ en fråga nedan och andra användare kommer att svara dig




Skrivare Zebra Manualer

Skrivare Manualer

Nyaste Skrivare Manualer