4ms Tapographic Delay Bruksanvisning
4ms
Inte kategoriserad
Tapographic Delay
Läs gratis den bruksanvisning för 4ms Tapographic Delay (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10 recensioner. Har du en fråga om 4ms Tapographic Delay eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20

Tapographic Delay
from 4ms Company and Matthias Puech
User Manual 1.0 – November 3, 2017
for firmware v1.0

Table of Contents
Introduction 3
Background 4
What’s a multi-tap delay? 4
What’s a tapography? 6
Installation 6
Getting started: Your first TD patch 7
Create a new Tapography 7
Editing your Tapography 8
Saving your Work 8
Explore the Knobs 8
Explore the Switches 8
Explore the Buttons 9
Sequencer Mode 9
Controls 9
Signal path 12
Editing tapographies 13
Entering Taps 13
ADD/OFF/INS Switch 13
RES/AMP/LPF Switch 14
Upper Button Row 14
Settings Menu 14
Navigating tapographies 16
Loading a tapography 16
Saving a tapography 16
Sequencer mode 17
Advanced features 17
Velocity normalization jumper 17
Firmware update 18
Calibration 19
Factory tapographies 19
Banks A - D 19
Reset a bank to factory default 21
Acknowledgments 21
Page
2

Introduction
The Tapographic Delay is a complex multi-tap delay in the Eurorack format with a unique
interface designed for live performance. It excels at transforming the simplest audio (a
drone, a percussive sound) into complex rhythmic structures, meshes of organic textures,
lush harmonic mille-feuilles, liquid and resonant effects… plus everything we have not
explored yet!
Have you ever got tired of the monotonous repetitions that your standard delay
pedal/module produced? Have you ever wished for a more complex rhythmic structure than
just decaying repetition? If yes, you have come to the right place: the Tapographic Delay is
an advanced effect that lets you handle repetition in ax completely novel way. It is in a way
to a traditional delay what a full rhythmic sequencer (with pattern recall, velocity control,
tactile input) is to a simple clock. With the TD, you interactively define the rhythm that the
repetitions will follow: a velocity-sensitive sensor allows you to record, edit, modify, and
sequence your own arrangements of delays. In a sense, the TD is the converse of the
classic Frippertronics sound-on-sound setup popularized by Robert Fripp in the 70’s: you
don't play the guitar, you play the tape loop!
The Tapographic Delay is an expressive experimental instrument meant to be played in
real-time, rather than a set-and-forget end-of-chain effect. Interact with it! Experiment! Push
it to its limits!
●Velocity-sensitive force sensor to tap the delay configurations ( tapographies
)
●Up to 32 taps, each with its own delay time, amplitude/filter and panning
●Low-pass filter or resonant (pingable) band-pass filter on each tap
●Morphing between delay configurations, with adjustable morph time
●Two different feedback paths: a Repeat toggle and a Feedback knob
●Save and recall up to 24 delay configurations (4 banks of 6 slots each)
●Tapography sequencer with forward, random walk or random directions
●Synchronization to an external clock, with clock divider/multiplier
●Gate output that plays the current rhythm of delays
●Maximum delay time of 174 seconds (almost 3 minutes)
●16 bits/48kHz with 32 bits floating-point internal processing, 1.3ms software latency
●Mono-in, stereo-out operation
●18HP Eurorack module
●Current consumption: 125mA of +12V; 32mA of -12V. (10-to-16pin cable included)
●0.98" (25mm) maximum depth with power cable
●Dry frequency response: 20Hz - 5kHz: +/-0.1dB. @10kHz: -2.3dB. @20kHz: -7.8dB
●Audio inputs max 22Vpp. Audio outputs soft-limit at max 17Vpp
●Trigger/clock inputs: +2V minimum, +12V maximum
●Gate (trigger) output: +8V, 4ms pulse width
Page
3
Produktspecifikationer
Varumärke: | 4ms |
Kategori: | Inte kategoriserad |
Modell: | Tapographic Delay |
Enhetsplacering: | Vrijstaand |
Färg på produkten: | Wit |
Vikt: | 68000 g |
Bredd: | 600 mm |
Djup: | 590 mm |
Höjd: | 847 mm |
Typ av laddare: | Voorbelading |
Trummaterial: | Roestvrijstaal |
Sladdlängd: | 1.6 m |
Trumminnehåll: | 55 l |
Fördröjd starttimer: | Ja |
Startfördröjning: | 24 uur |
Barnlås: | Ja |
Energieffektivitetsklass (gammal): | A |
Strömförsörjning: | 220 - 240 V, 50 Hz |
Tvätt energiförbrukning: | 1.05 kWu |
Vattenförbrukning per cykel: | 47 l |
Var klass: | A |
Årlig tvättenergiförbrukning: | 210 kWu |
Centrifuger läkemedelsklass: | C |
Obalans kontrollsystem: | Ja |
Justerbar centrifughastighet: | Ja |
Maximal centrifugeringshastighet: | 1000 RPM |
Nuvarande: | 10 A |
Årlig tvättvattenförbrukning: | 9400 l |
Restfuktprocent: | 59 procent |
Cykeltid (max): | 188 min |
AquaStop-funktion: | Ja |
Rinse Plus-funktion: | Nee |
Nominell kapacitet: | 7 kg |
Strömförbrukning (typiskt): | 2300 W |
Type beeldscherm: | LED |
Wasprogramma's: | Hygiene/anti-allergy, Black |
Behöver du hjälp?
Om du behöver hjälp med 4ms Tapographic Delay ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad 4ms Manualer
1 Oktober 2024
22 September 2024
22 September 2024
11 September 2024
11 September 2024
5 September 2024
3 September 2024
3 September 2024
30 Augusti 2024
27 Augusti 2024
Inte kategoriserad Manualer
- Point Source Audio
- Twisted Electrons
- JAR Systems
- Meade
- Sweex
- Simmons
- Foppapedretti
- Triax
- Insteon
- Telestar
- Noise Engineering
- Globalo
- Qubino
- Shark
- Herma
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025