AMX MXA-FMK-10 Bruksanvisning
AMX
Inte kategoriserad
MXA-FMK-10
Läs gratis den bruksanvisning för AMX MXA-FMK-10 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om AMX MXA-FMK-10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
QUICK START GUIDE
MSA-RMK-10 10.1” Modero S Series
®
Rack Mount Kit
Overview
The MSA-RMK-10 Modero S Series
®
Rack Mount Kit (FG2265-14) is an optional
accessory for the MSD-1001 10.1” Modero S Series Wall Mount Touch Panel (FIG. 1).
The kit allows the touch panel to be mounted directly on an equipment rack, and
includes a rack mount frame, screws and washers.
Product Specif ications
Installation of the MSA-RMK-10
The MSA-RMK-10 offers a stable installation mount for the MSD-1001 through the
panel’s Back Box.
NOTE: All doors, covers, and other obstacles preventing installation of the Rack Mount Kit
should be removed before installation is attempted. Due to the size of the Modero S Series
panel, it may not be possible to close racks that contain a rack door, once installation is
complete.
To install the MSA-RMK-10:
1. Secure the Rack Mount Panel to the rack with #10-32 screws. Make sure that the
installation flanges face away from the front of the rack (FIG. 2).
2. Insert the Back Box into the Rack Mount Panel, making sure that the Back Box is
in the correct orientation. The stand-offs on the installation flanges will pass
through the Back Box and help anchor it in place.
3. Use the #8-32 screws to attach the Back Box to the stand-offs. Note that the
Rack Mount Panel has four stand-offs.
WARNING: The maximum recommended torque to be used on the Back Box
installation screws is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening
the screws, such as with powered screwdrivers, can strip out the screw holes or
damage the plastic back box..
4. With the Back Box anchored in the Rack Mount Panel (FIG. 3), you may now install
the MSD-1001 into the Back Box.
NOTE: For more information on installing the MSD-1001 into its back box, please refer to
the MSD/T-1001 Operation Reference Guide, available from www.amx.com.
FIG. 1
MSA-RMK-10
MSA-RMK-10 (FG2265-14) SPECIFICATIONS
Dimensions (HWD): 6.97” x 19.00” x 2.15” (17.70 cm x 48.26 cm x 5.45 cm)
Weight:
2.60 lbs (1.47 kg)
Included Accessories: • Screws (4), #8-32 X 1.00, PPH (80-0140)
• Screws (4), #10-32 X .625, PH.TRUSS, BLK (80-0186)
• Washers (4), #10, BLACK NYLON (80-0342)
19.00” (48.26 cm)
6.97”
(17.70 cm)
2.15”
(5.45 cm)
Front View
Top View
Side View
6.97”
(17.70 cm)
2.15” (5.45 cm)
Up
Installation
Flanges
Stand-offs
Up
FIG. 2 INSTALLATION OF THE BACK BOX INTO THE MSA-RMK-10, FRONT VIEW
FIG. 3 FINAL ASSEMBLY OF THE MSA-RMK-10 WITH BACK BOX
#10-32 Screws
#10-32 Washers
Attach the Rack-Mount
Kit to the equipment rack
Back Box
Rack Mount Panel
Installation Flanges
# 8-32 Screws (x4)
Attach the Back Box
to the Rack-Mount Kit
(with 4 Stand-offs)
Back Box
Rack Mount Kit
Produktspecifikationer
| Varumärke: | AMX |
| Kategori: | Inte kategoriserad |
| Modell: | MXA-FMK-10 |
Behöver du hjälp?
Om du behöver hjälp med AMX MXA-FMK-10 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad AMX Manualer
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
27 December 2024
7 December 2024
25 September 2024
25 September 2024
24 September 2024
Inte kategoriserad Manualer
- Schertler
- Delta
- MB Quart
- BBE
- Max Pro
- My Wall
- HELGI
- Fezz
- Aiwa
- Club 3D
- Start International
- Vogue
- Marmitek
- Sigma
- Medel
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025