ART TUBE MP Project Series Bruksanvisning
Läs gratis den bruksanvisning för ART TUBE MP Project Series (12 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7 recensioner. Har du en fråga om ART TUBE MP Project Series eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
TUBE MP
TUBE MP
TUBE MP
TUBE MP TUBE MP
Professional Microphone & Instrument Tube Preamplifier
Project Series
User’s Manual
1
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.
Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Connect the units power supply to mains power only of the type described in this user manual or marked on the power
supply.
Power supply:
Use the power supply with sealed mains plug appropriate for your local mains supply as provided with the equipment. If
the provided supply does not fit into you outlet consult your service agent. Route the power cord so that it is not likely to
be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarization means of the power supply.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to moisture or use in damp or wet conditions. Do not
place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a fire hazard. Locate the unit away
from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Unplug power immediately if equipment is exposed to moisture, the power supply becomes damaged during a lightning
storm or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
2
INTRODUCTION
Thank you for purchasing the ART Tube MP Project Series with USB. Though it is very reliable and easy to use,
we ask that you take a moment to read the manual to get the best performance.
The Tube MP Project Series with USB is a professional quality audio interface that lets you connect microphone,
instrument, and line level signals to a mixer or other audio input as well as directly to your computer via USB.
This hybrid design is the latest in a long line of ART tube preamps. We took our legendary Tube MP series and
updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost-effective
product. From the all-aluminum stackable chassis to the precision LED level metering circuitry, we have improved
virtually every aspect of our already successful Tube MP series.
Included in this model is a USB interface that adds the ability to go direct to digital audio for connecting to virtually
any personal computer. It works with the USB audio device drivers that are already built into Windows 98SE to
current operating systems as well as Apple OS9.1/OSX to current software, computers with native USB support.
No special drivers are needed for basic operation. Just connect to the USB jack and your Tube MP will look like
a USB Audio Device to your system. This gives you a totally isolated low noise audio interface for hard disk
recording.
The ultra low noise discrete microphone preamp front end has an extremely flat and wide frequency response
and handles a wide range of input signal levels with a minimum of coloration. This gives you a very clean and
neutral sound with a wide variety of signal sources. The high impedance ¼-inch instrument input bypasses the
microphone preamp circuitry to maintain a clean signal path. We use a high quality 12AX7A tube inside to add
warmth to musical dynamics and the analog section power supply is external to keep AC line noise and hum
back at the wall. The USB interface is isolated and powered directly off the USB port.
The input Gain control and switch helps to maximize your input dynamic range as well as control how hard you
are driving the tube. Input impedance is switch selectable to optimize your microphone response right on the
front end. These two features are a must when trying to get the most out of a vintage ribbon or studio grade
microphone. The switch selectable high pass filter removes very low frequency rumble and wind noise before it
has a chance to overload your inputs. The Bessel filter design is set at a low 40Hz to preserve bass tonality and
time domain response and it is very effective when tracking or interfacing to your computer-based audio work-
station. Phantom power is available for the XLR input and is a clean +48 Volts DC from a low noise internal
supply that is current limited to prevent damage to your sensitive microphones.
A FET Limiter with fast attack and musical release times limits the maximum audio output level to prevent over-
loading succeeding equipment while still maintaining a clear uncompressed sound. This allows you to maximize
the dynamic range of your signal before converting to digital. A Phase Invert switch lets you switch signal polarity
right at the source. This is handy when you are mixing the signal output with other channels in a mix. The Output
control comes after the Tube, Limiter, and Metering and is used to match the output level to a wide variety of
systems. Following it is a high-performance output section that provides high output signal drive capability to
both analog outputs and also feeds the input to the USB interface. This allows you to use the analog output jacks
to directly monitor, with no latency, the signal that is going to digital via the USB interface.
Produktspecifikationer
| Varumärke: | ART |
| Kategori: | mottagare |
| Modell: | TUBE MP Project Series |
Behöver du hjälp?
Om du behöver hjälp med ART TUBE MP Project Series ställ en fråga nedan och andra användare kommer att svara dig
mottagare ART Manualer
1 Augusti 2025
31 Juli 2025
16 September 2024
9 September 2024
9 September 2024
8 September 2024
24 Augusti 2024
23 Augusti 2024
22 Augusti 2024
20 Augusti 2024
mottagare Manualer
- Zalman
- NuPrime
- Panasonic
- BC Acoustique
- DirecTV
- Audibax
- Boss
- Musway
- Warm Audio
- Nokia
- Iriver
- Pinnacle
- BMB
- Zoom
- Neumann
Nyaste mottagare Manualer
2 Augusti 2025
2 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025