Atdec TH-1040-CT-B2B Bruksanvisning
Atdec
Inte kategoriserad
TH-1040-CT-B2B
Läs gratis den bruksanvisning för Atdec TH-1040-CT-B2B (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7.5 recensioner. Har du en fråga om Atdec TH-1040-CT-B2B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
! This product is to be installed in conjunction with TH-1040-CTS and TH-1040-CTL Ceiling Mounts only.
Component Checklist
Mount Head
Accessory
VESA Plate
TH-1040-CT-B2B
Back to Back Accessory for TH-1040-CTS and TH-1040-CTL
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Step 2. Remove Back of Existing Mount Head
Step 3. Install Mount Head Accessory
! IMPORTANT - Install 1040 Back to Back Accessory as per Installation Instructions.
Hardware
! The manufacturer accepts no responsibility for incorrect installation.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 30.09.11 ©
Installation Complete
Fully installed TH-1040-CTS or
TH-1040-CTL (VESA Plate removed).
M4x16/25mm
(x4 each)
M5x16/25mm
(x4 each)
M6x16/30mm
(x4 each)
Refer to TH-1040-CTS/TH-1040-CTL Installation Instructions, Step 8. Attach VESA Plate to Display.
M4/5 Washer
(x4)
M4/5 Spacer (x4)
M6/8 Spacer (x4)
Security Screw
(optional)
Display
Mounting
Screws
5mm/3mm
Allen Keys
(x1 each)
NOTE: Phillips-head
screwdriver not supplied
5mm Allen Key
Socket Cap Screw
Back
REMOVE
Socket Cap
Screw
Use the 5mm
Allen Key supplied.
Keep Socket Cap Screws for Step 3.
Remove back half of the existing
Mount Head by removing
Socket Cap Screws (x2).
Socket Cap Screw
5mm Allen Key
Mount Head
Accessory
Socket Cap Screw
Attach the Mount Head
Accessory with
the Socket
Cap Screws (x2).
Tighten screws firmly
and .equally
Installation Instructions
Produktspecifikationer
| Varumärke: | Atdec |
| Kategori: | Inte kategoriserad |
| Modell: | TH-1040-CT-B2B |
Behöver du hjälp?
Om du behöver hjälp med Atdec TH-1040-CT-B2B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Atdec Manualer
30 Januari 2025
29 December 2024
7 December 2024
7 December 2024
7 December 2024
20 September 2024
10 September 2024
10 September 2024
10 September 2024
10 September 2024
Inte kategoriserad Manualer
- Champion
- Norton Clipper
- J.P. Instruments
- Atlas Sound
- Autodesk
- Esdec
- Snoes
- Victrola
- Aerotec
- TK Audio
- Liam&Daan
- Sun Pumps
- Selleys
- Lumag
- Zega
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025