Atdec VF-AT-W Bruksanvisning


Läs gratis den bruksanvisning för Atdec VF-AT-W (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 14.5 recensioner. Har du en fråga om Atdec VF-AT-W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Installation Instructions
VF-AT-W
Component Checklist
Focus | Articulated Arm | Wall
M4x10/12/16mm (x4)
Phillips Head
Mounting Screws
Primary Arm
Cable Cover
Secondary Arm
Cable Cover
End CapArm Assembly
Wall Plate
5mm
Allen Key
Nylon Anchor
Plug (x2)
M4 x 12mm
Countersunk
Screw (x2)
M6 x 50mm
Countersunk
Screw (x2)
2.5mm
Allen Key
Display Mounting
Screws
HARDWARE
! IMPORTANT - Install Visidec Focus Articulated Arm Wall as per installation instruction.
! This product supports a maximum load of 8kg (17.6lbs).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check what you have received against the component checklist and hardware above.
Step 2. Position Wall Plate
As a guide, it is recommended that the bottom of the Wall Plate be positioned approximately 140mm (5 1/2”)
above the desktop.
For further Ergonomic Guidelines, please refer to the end of the document.
Note: The Focus
Articulated Arm Wall
provides vertical
adjustment of 128mm.
Tools Required:
• Power Drill
5.5mm (1/4”) Drill Bit
8mm (5/16”) Drill Bit
Phillips Head Screwdriver
128mm (5”)
140mm (5 1/2”)


Produktspecifikationer

Varumärke: Atdec
Kategori: Inte kategoriserad
Modell: VF-AT-W
Rotationsvinkel: 360 °
Lutningsvinkel: -70 - 70 °
Maxvikt: 7.9 kg
Produktens färg: Silver
Monteringssätt: Bord
Panoreringsvinkel: 0 - 180 °

Behöver du hjälp?

Om du behöver hjälp med Atdec VF-AT-W ställ en fråga nedan och andra användare kommer att svara dig