Audio-Technica AT4050ST Bruksanvisning
Sidor 2 Engels mikrofon
Läs bruksanvisningen för Audio-Technica AT4050ST gratis online eller ladda ner PDF:en. 12 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
40 series microphones
AT4050ST
Stereo Condenser Microphone
Features
• Innovativeside-addressMid-Sidestereomicrophoneengineered
forprofessionalrecording,broadcastandsoundreinforcement
• Independentcardioidandgure-of-eightcondenserelements
• SwitchselectionofM-Smodeandtwointernallymatrixed
stereomodes
• Dual-diaphragmcapsulesmaintainprecisepolarpatterndenition
acrossthefullfrequencyrangeofthemicrophone
• Transformerlesscircuitryvirtuallyeliminateslow-frequency
distortionandprovidessuperiorcorrelationofhigh-speedtransients
• The2-micron-thick,vapor-depositedgolddiaphragmsundergoa
ve-stepagingprocesssothattheoptimumcharacteristics
remainconstantoveryearsofuse
• Openacousticalenvironmentofthesymmetricalhousing
assemblyminimizesunwantedinternalreections
• Customshockmountprovidessuperiorisolation
• Integral80Hzhigh-passlterswitchand10dBpadswitch
• State-of-the-artdesignandmanufacturingtechniquesensure
compliancewithA-T’sstringentconsistencyandreliabilitystandards
Description
The AT4050ST is a stereo side-address externally polarized (DC bias)
condenser microphone with independent cardioid and gure-of-eight
elements congured in a Mid-Side arrangement with switch-selectable
internal matrixing. The microphone allows sound recordists the choice
of selecting a left-right stereo output (wide 127° or narrow 90°) via the
microphone’s internal matrixing system or choosing discrete Mid-Side
signals for later manipulation. It is designed to meet the most critical
acoustic requirements of professional recording, broadcast and sound
reinforcement.
The microphone requires 48V phantom power for operation.
The microphone includes a 5.0 m (16.5') dual output cable terminating
in a 5-pin XLRF-type to two standard 3-pin XLRM-type connectors. The
output of the microphone is a 5-pin XLRM-type connector.
The microphone is equipped with a switchable 10 dB pad and a switch
that permits choice of at response or low-frequency roll-off (via integral
80 Hz high-pass lter).
The microphone is enclosed in a rugged housing. The included AT8449
shock mount provides superior isolation and permits mounting on any
microphone stand with 5/8"-27 threads. A dust cover and a protective
carrying case are also included.
Operation and Maintenance
The AT4050ST requires 48V phantom power on Pins 2 and 3 of both
XLR3M-type connectors for operation. Wiring must be balanced
throughout, and all mic cables in the system must be wired consistently:
Pin 1-to-Pin 1, etc. If connecting to unbalanced inputs, good-quality
balanced line transformers must be used.
Mid-Side Operation: In M-S mode, the microphone provides independent
Mid and Side signals. This allows the width of the stereo image to be
adjusted in post production or in the eld with a matrix mixer.
Matrixed Stereo: The microphone offers two internally matrixed modes
which provide traditional “left-right” stereo without the need for external
mixers. To accommodate varying acoustic environments, the user may
select between a wide pattern (127°) with increased ambient pickup, and
a narrow pattern (90°) which offers more rejection and less ambience.
Output phase is “Pin 2 hot.”
For correct left-right stereo orientation, position the microphone so
the raised Audio-Technica emblem is facing the sound source. In the
internally matrixed modes, locating the microphone nearer the sound
source enhances the apparent width of the stereo image, while
decreasing room ambience. Moving away from the sound source will
result in a narrower stereo image and more room sound.
M-SOutputConnectorPin1 Pin2 Pin3
Mid XLR3M-Gray Ground Mid + Mid –
XLR5M Mic Connector: Pin 1 Pin 2 Pin 3
Side XLR3M-Red Ground Side + Side –
XLR5M Mic Connector: Pin 1 Pin 4 Pin 5
MatrixOutputConnectorPin1 Pin2 Pin3
Left XLR3M-Gray Ground L + L –
XLR5M Mic Connector: Pin 1 Pin 2 Pin 3
Right XLR3M-Red Ground R + R –
XLR5M Mic Connector: Pin 1 Pin 4 Pin 5
An integral 80 Hz high-pass lter provides easy switching from a at
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
To engage the high-pass lter, slide the switch toward the “bent” line.
The microphone is also equipped with a switchable 10 dB pad that lowers
the microphone’s sensitivity, providing higher Max SPL capability for
exible use with a wide range of users and system congurations. To
engage the 10 dB pad, slide the switch toward the -10 position.
In use, secure the cable to the mic stand or boom, leaving a slack loop
at the mic. This will ensure the most effective shock isolation and reduce
the possibility of accidentally pulling the microphone out of its mount.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Architect’s and Engineer’s Specications
The microphone shall be a side-address Mid-Side stereo design with two
independent externally polarized (DC bias) condenser elements. It shall
have cardioid and gure-of-eight polar patterns and a frequency response
of 20 Hz to 18,000 Hz. The microphone shall operate from an external 48V
DC phantom power source. It shall be capable of handling sound input
levels up to 149 dB (159 dB with 10 dB pad–mid and side) with a dynamic
range of 134 dB (mid), 132 dB (side). Nominal open circuit output voltage
shall be 15.8 mV (mid), 15.8 mV (side), 7.9 mV (stereo 90º), 8.9 mV (stereo
127º) at 1V, 1 Pascal. Output shall be low impedance balanced (50 ohms).
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | mikrofon |
| Modell: | AT4050ST |
| Färg på produkten: | Zwart |
| Bredd: | 53.4 mm |
| Djup: | 53.4 mm |
| Höjd: | 170 mm |
| Årlig-energiförbrukning: | 66 kWu |
| Energieffektivitetsklass (gammal): | A+ |
| Skärm diagonal: | 40 " |
| Upplösning: | 1920 x 1080 Pixels |
| Videoformat som stöds: | ASF, AVI, FLV, H.264, H.265, M2TS, MKV, MP4, MPEG4, MPG, RM, RMVB, SWF, TS, VOB, WMV |
| Ethernet LAN: | Ja |
| Skärmform: | Flat |
| Ljusstyrka: | 280 cd/m² |
| Antal USB 2.0-portar: | 2 |
| Antal HDMI-portar: | 3 |
| Audio-ingan (L, R): | 1 |
| Kompositvideoingång: | 1 |
| Komponenter för video (YPbPr/YCbCr): | 1 |
| DVI-port: | Nee |
| Antal Ethernet LAN (RJ-45)-portar: | 1 |
| Inbyggda högtalare: | Ja |
| Genomsnittlig effekt: | 8 W |
| Strömförbrukning (i standby): | 0.5 W |
| Strömförbrukning (max): | 80 W |
| Antal högtalare: | 2 |
| Hörlursutgångar: | 1 |
| Analog signalformat: | PAL, SECAM |
| HD typ: | Full HD |
| 3D: | Nee |
| Respons tid: | - ms |
| VESA montering: | Ja |
| Panelmonteringsgränssnitt: | 200 x 200 mm |
| Kontrastförhållande (dynamisk): | 1000000:1 |
| Djup (utan bas): | 92 mm |
| Höjd (utan bas): | 553 mm |
| Bredd (utan bas): | 929 mm |
| Vikt (utan bas): | - g |
| Skärmdiameter i centimeter: | 100 cm |
| PC-ingang (D-Sub): | Nee |
| Digitalt ljud, optisk utgång: | 1 |
| Common Interface Plus (CI+): | Ja |
| Typ av tuner: | Analoog & digitaal |
| Digitalt signalformat: | DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2 |
| Enhetsbredd (med stativ): | 929 mm |
| Djupenhet (med stativ): | 200 mm |
| Enhetshöjd (med stativ): | 601 mm |
| Vikt (med stativ): | 8100 g |
| Strömförbrukning (PowerSave): | 45 W |
| Rörelseinterpolationsteknik: | Active Motion 100 |
| Teknik för ljudavkodning: | DTS 2.0, DTS TruSurround, Dolby Digital Plus |
| Impedans: | 100 Ω |
| LED backlight-type: | Direct-LED |
| Antal SCART-portar: | 1 |
| Strömförbrukning (genomsnitt): | 60 W |
| Mikrofonfrekvens: | 20 - 20000 hz |
| Wifi: | Nee |
| AC-ingångsspänning: | 220 - 240 V |
| AC-ingångsfrekvens: | 50 Hz |
| Strömförbrukning (typiskt): | 60 W |
| Produktens färg: | Svart |
| Skrivbordsstativ: | Ja |
| Mikrofonvikt: | 360 g |
| Anslutningsteknologi: | Kabel |
| Signal/brusförhållande (SNR): | 82 dB |
| Mikrofon, riktning: | Kardioid |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica AT4050ST ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Audio-Technica Manualer
Audio-Technica BP892xCT4 Bruksanvisning Audio-Technica ATR6250X Bruksanvisning Audio-Technica ATW-3211 Bruksanvisning Audio-Technica ATW-1101/H Bruksanvisning Audio-Technica ATM-510 Bruksanvisning Audio-Technica AT8024 Bruksanvisning Audio-Technica ES945WO/XLR Bruksanvisning Audio-Technica ATM-450 Bruksanvisning
Alla Audio-Technica mikrofon manualer
Populära i mikrofon
Audio-Technica AT808G Bruksanvisning Audio-Technica AT875R Bruksanvisning Audio-Technica XM1S Bruksanvisning
mikrofon Manualer
Nyaste mikrofon Manualer
Lectrosonics LRBATELIM Bruksanvisning Airwave Technologies AT-5220 Bruksanvisning Toa IR-842PMU-AM Bruksanvisning Toa YP-M301 Bruksanvisning Toa PM-660D Bruksanvisning Airwave Technologies AT-5250 Bruksanvisning Toa YP-M101 Bruksanvisning Toa YP-M5000E Bruksanvisning Airwave Technologies HSD-Slimclip Dual-Ear Adapter Bruksanvisning Toa BC-5000-6 Bruksanvisning