Audio-Technica ATM410 Bruksanvisning
Audio-Technica
mikrofon
ATM410
Läs gratis den bruksanvisning för Audio-Technica ATM410 (2 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om Audio-Technica ATM410 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
CARDIOID DYNAMIC VOCAL MICROPHONE
- Tailored for smooth, natural vocal reproduction.
- Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source.
- Durable performance for professional applications.
- Hi-ENERGY® neodymium magnet for improved output and transient
response.
- Excellent off-axis rejection for minimum feedback.
- Superior anti-shock engineering for low handling noise.
- Multi-stage grille design offers excellent protection against plosives
and sibilance without compromising high-frequency clarity.
- Quiet-Flex™ stand clamp provides silent, exible microphone
positioning.
- Corrosion-resistant contacts from gold-plated XLRM-type connector.
- Rugged, all-metal design and construction for years of trouble-free
use.
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins 2 and
3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” - positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must
be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance
(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching
transformer (A-T CP8201 or equal) at the equipment input.
When using the ATM410 in settings with a stage monitor speaker,
the speaker should be located 180° off axis (at the rear of the
microphone). This placement, in conjunction with the microphone’s
uniform cardioid pickup pattern, will virtually eliminate the possibility
of undesired audio feedback.
Take care to keep foreign particles from entering the windscreen.
An accumulation of iron or steel filings on the diaphragm, and/or
foreign material in the windscreen’s mesh surface, can degrade
performance.
FORM No. ATGC-L0030-06-E
Machida • Toky o • Japa n
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 90-16,000 Hz
OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa
IMPEDANCE 300 ohms
WEIGHT (less cable and accessories) 233 g
DIMENSIONS 170.0 mm - long,
53.5 mm - diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for
⅝”-27 threaded stand;
⅝”-27 to ⅜”-16 threaded adapter;
Soft protective pouch
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | mikrofon |
| Modell: | ATM410 |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica ATM410 ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Audio-Technica Manualer
19 Oktober 2025
19 Oktober 2025
1 Mars 2025
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
mikrofon Manualer
- Lorgar
- Dorr
- Bogen
- Chord
- AmpliVox
- Tracer
- Neumann
- Amazon
- Singing Machine
- Wisycom
- Kogan
- Yealink
- Apogee
- Icom
- AVMATRIX
Nyaste mikrofon Manualer
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
16 Oktober 2025
15 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025