Audio-Technica ES925H/FM3 Bruksanvisning
Sidor 3 Engels mikrofon
Läs bruksanvisningen för Audio-Technica ES925H/FM3 gratis online eller ladda ner PDF:en. 34 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
1
ES925H6/FM3
ES925H12/FM3
ES925H15/FM3
ES925H18/FM3
ES925H21/FM3
ES925H24/FM3
User Manual
HYPERCARDIOID CONDENSER
MODULAR GOOSENECK MICROPHONE
WITH 3-PIN FLUSH-MOUNT POWER MODULE
■Introduction
Thank you for purchasing this product. Before using the product, read through
the user manual to ensure that you will use the product correctly. Please keep
this manual for future reference.
■Features
• Modular microphone system comprised of an ES Series capsule, gooseneck
assembly, and power module.
• RGB LEDs built into both the flush-mount power module and gooseneck
assembly indicate the on/off status of the microphone.
• Capacitive touch switch for microphone control.
• Three-pin output power module allows for inconspicuous tabletop installation.
■Safety precautions
Although this product was designed to be used safely, failing to use it correctly
may result in an accident. To ensure safety, observe all warnings and cautions
while using the product.
■Cautions for the product
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a
hot, humid or dusty place.
■Notes on use
• Check the strength of the mounting area. Insufficient strength or poor
mounting will cause objects to fall or become damaged.
• The circuitry in the microphone takes about 30 seconds to stabilize after power
is supplied. You may hear some audio disturbance during startup.
• Install the microphone on a flat, unobstructed mounting surface.
• Depending on the surface finish of a table, the isolators may leave marks on
the table.
• Do not excessively bend the gooseneck assembly, rotate the ends of the
capsule, or pull on them. Doing so may cause disconnection or malfunction.
• The product is a modular system comprised of a microphone element,
gooseneck assembly and power module. Make sure the parts are firmly
attached before use.
• Do not remove the rubber O-ring on the power module connecting part at the
lower section of the gooseneck assembly.
• When attaching parts, remove the black cap on the capsule connecting part
of the gooseneck assembly.Do not remove the silicone part at the end of
the capsule connecting part.
Silicone part
Do not remove
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | mikrofon |
| Modell: | ES925H/FM3 |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica ES925H/FM3 ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Audio-Technica Manualer
Audio-Technica Pro 88W-830 Bruksanvisning Audio-Technica AE6100 Bruksanvisning Audio-Technica ATM450 Bruksanvisning Audio-Technica AT4051b Bruksanvisning Audio-Technica PRO 24-CM Bruksanvisning Audio-Technica ATW-1311 Bruksanvisning Audio-Technica ES925H/XLR Bruksanvisning Audio-Technica ES925C/DS5 Bruksanvisning
Alla Audio-Technica mikrofon manualer
Populära i mikrofon
Audio-Technica AT808G Bruksanvisning Audio-Technica AT875R Bruksanvisning Audio-Technica XM1S Bruksanvisning
mikrofon Manualer
Nyaste mikrofon Manualer
Lectrosonics VRT2 Bruksanvisning Lectrosonics SMDWB/E07-941 Bruksanvisning Lectrosonics LRBATELIM Bruksanvisning Airwave Technologies AT-5220 Bruksanvisning Toa IR-842PMU-AM Bruksanvisning Toa YP-M301 Bruksanvisning Toa PM-660D Bruksanvisning Airwave Technologies AT-5250 Bruksanvisning Toa YP-M101 Bruksanvisning Toa YP-M5000E Bruksanvisning