AXESS AX-FT901 Bruksanvisning
Sidor 8 Engelska Inte kategoriserad
Läs bruksanvisningen för AXESS AX-FT901 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 16 gånger. Fråga om modellen? Ställ en fråga
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-FT901
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/10/18 INSTAX-FT901
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made ....................................2-3
Installing the AX-FT901 interface ..........................3
Programming the ASWC-1 interface .................3-4
Screen operation ................................................4-6
Fiat 500 500L 2015 / 2014 (with U-Connect) Data Interface with SWC & Factory Display Retention †
• Provides accessory power
• Designed for non-amplified models
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains balance and fade
• Retains most of the vehicle settings that was displayed on the
factory radio *
• Micro “B” USB updatable
† For Continental Mopar head unit
* Attention!
The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn’t have a backup camera
Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.
• AX-FT901 interface
• ASWC-1 interface
• AX-FT901 harness
• ASWC-1 harness
Produktspecifikationer
| Varumärke: | AXESS |
| Kategori: | Inte kategoriserad |
| Modell: | AX-FT901 |
Behöver du hjälp?
Om du behöver hjälp med AXESS AX-FT901 ställ en fråga nedan och andra användare kommer att svara dig