AXESS AX-PS Bruksanvisning
AXESS
Inte kategoriserad
AX-PS
Läs gratis den bruksanvisning för AXESS AX-PS (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8.5 recensioner. Har du en fråga om AXESS AX-PS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
AX-PS
AX-PS
I N S T A L L A T I O N I N S T R U C T I O N S
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23
A
B
AX-PS
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
Universal-Amp Turn On/Off Timer
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the . Red LED flashes
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay setting, the . Green LED flashes
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
SPECIFICATIONS
Working Voltage: 10v-16v
Trigger output current: 500mA
Trigger input Current: 1mA
TURN-ON DELAY
(GREEN LED)
TURN-OFF DELAY (RED LED)
A
B
AX-PS
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
Universal-Amp Turn On/Off Timer
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the . Red LED flashes
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay Green LED flashes setting, the .
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
SPECIFICATIONS
Working Voltage: 10v-16v
Trigger output current: 500mA
Trigger input Current: 1mA
TURN-ON DELAY
(GREEN LED)
TURN-OFF DELAY (RED LED)
Produktspecifikationer
| Varumärke: | AXESS |
| Kategori: | Inte kategoriserad |
| Modell: | AX-PS |
Behöver du hjälp?
Om du behöver hjälp med AXESS AX-PS ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad AXESS Manualer
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
Inte kategoriserad Manualer
- Sound Devices
- IDIS
- Nerf
- Omnitron Systems
- Sodastream
- Tusa
- Baby Annabell
- Inter-Tech
- STANDIVARIUS
- Sightron
- Rotronic
- Germania
- ECTIVE
- ViewZ
- Casalux
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025