Axxess AX-VW93-CAM Bruksanvisning
Axxess
ej kategoriserat
AX-VW93-CAM
Läs gratis den bruksanvisning för Axxess AX-VW93-CAM (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 3 recensioner. Har du en fråga om Axxess AX-VW93-CAM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
AX-VW93-CAM AX-VW93-CAM AX-VW93-CAM
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 3/1/18 REV. 3/1/18 REV. 3/1/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
AX-VW93-CAM
Volkswagen Golf (MK VII)
Camera Retention Interface
2012*
Connections to be made
• Connect the Black wire to chassis ground.
• Connect the Red wire to accessory power.
• Connect the Green wire to reverse power (switched).
• Connect the Yellow RCA jack to the aftermarket backup camera.
Installing the Interface
• Remove the main connector from the radio, then connect the
male
plug
from the
AX-VW93-CAM
into the radio.
• Connect the
male
factory connector into the
female
plug from the
AX-VW93-CAM
.
• Connect the
AX-VW93-CAM harness
into the AX-VW93-CAM interface.
• Test for correct operation.
• Allows a camera to be added to the factory radio
• Plug-and-play, no cutting of wires required
• Designed for NTSC cameras
• Auto switch in reverse gear
INTERFACE FEATURES
* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition
Media (MIB STD2), Discover Media (MIB STD2).
* Vehicle must have an OPS (Optical Parking Sensor) head unit.
* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,
3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.
* For Professional installation ONLY, requires specialist equipment and knowledge to
program vehicle on-board settings to enable camera operation.
* Camera must be activated via VCDS. Head unit must be coded.
AX-VW93-CAM
Volkswagen Golf (MK VII)
Camera Retention Interface
2012*
AX-VW93-CAM
Volkswagen Golf (MK VII)
Camera Retention Interface
2012*
Connections to be made
• Connect the Black wire to chassis ground.
• Connect the Red wire to accessory power.
• Connect the Green wire to reverse power (switched).
• Connect the Yellow RCA jack to the aftermarket backup camera.
Installing the Interface
• Remove the main connector from the radio, then connect the
male
plug
from the
AX-VW93-CAM
into the radio.
• Connect the factory
male
factory connector into the
female
plug from the
AX-VW93-CAM
.
• Connect the
AX-VW93-CAM harness
into the AX-VW93-CAM interface.
• Test for correct operation.
Connections to be made
• Connect the Black wire to chassis ground.
• Connect the Red wire to accessory power.
• Connect the Green wire to reverse power (switched).
• Connect the Yellow RCA jack to the aftermarket backup camera.
Installing the Interface
• Remove the main connector from the radio, then connect the
male
plug
from the
AX-VW93-CAM
into the radio.
• Connect the factory
male
factory connector into the
female
plug from the
AX-VW93-CAM
.
• Connect the
AX-VW93-CAM harness
into the AX-VW93-CAM interface.
• Test for correct operation.
• Allows a camera to be added to the factory radio
• Plug-and-play, no cutting of wires required
• Designed for NTSC cameras
• Auto switch in reverse gear
• Allows a camera to be added to the factory radio
• Plug-and-play, no cutting of wires required
• Designed for NTSC cameras
• Auto switch in reverse gear
INTERFACE FEATURES INTERFACE FEATURES
* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition
Media (MIB STD2), Discover Media (MIB STD2).
* Vehicle must have an OPS (Optical Parking Sensor) head unit.
* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,
3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.
* For Professional installation ONLY, requires specialist equipment and knowledge to
program vehicle on-board settings to enable camera operation.
* Camera must be activated via VCDS. Head unit must be coded.
* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition
Media (MIB STD2), Discover Media (MIB STD2).
* Vehicle must have an OPS (Optical Parking Sensor) head unit.
* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,
3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.
* For Professional installation ONLY, requires specialist equipment and knowledge to
program vehicle on-board settings to enable camera operation.
* Camera must be activated via VCDS. Head unit must be coded.
Produktspecifikationer
| Varumärke: | Axxess |
| Kategori: | ej kategoriserat |
| Modell: | AX-VW93-CAM |
Behöver du hjälp?
Om du behöver hjälp med Axxess AX-VW93-CAM ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Axxess Manualer
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
ej kategoriserat Manualer
- BVB
- Scheppach
- Mountfield
- Elysia
- Vacmaster
- Marantz
- Thermalright
- Lionelo
- Becker
- TDX
- Yamaha
- Nevadent
- Swissonic
- Brizo
- Voltcraft
Nyaste ej kategoriserat Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025