Axxess AXABH-CH2 Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXABH-CH2 (8 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om Axxess AXABH-CH2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
AXABH-CH2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/03/25 INSTAXABH-CH2
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Connections
White 22-Pin Harness ..................................... 2-3
Black 16-Pin Harness.......................................3-6
Refer to the following pages for the vehicle specific
instructions for wiring connections. Wiring connections
vary per vehicle. Please note that there are (2) different
wiring harnesses included, and the instructions for each
harness will be on a different page.
If it’s uncertain whether the vehicle contains a specific
speaker or not, test the wires with a tone generator, or
check to see if the factory wires are populated on the
vehicle side. Alternatively, the wires can be tested for
impedance with a multimeter.
APPLICATIONS
Chrysler
200 ..................................2015-2017
300 (Base Amp) .............2011-2014
Town & Country ...........2008-2020
Dodge
Charger (Base Amp) ......2011-2014
Dart .................................2013-2016
Durango .........................2014-2020
Grand Caravan .............2008-2020
Journey .......................... 2011-2020
Nitro ................................2007-2011
Jeep
Compass .........................2017-2021
Grand Cherokee
(Base Amp) ................. 2011-2013
Liberty ............................2008-2012
Wrangler JK ...................2007-2017
Ram
1500/2500/3500 ............. 2013-2021
Amplifier Bypass Harness
Fits Select Chrysler Models 2007-2023
FEATURES
• Vehicle-specific harness to bypass the factory amplifier
• Saves the installer unnecessary labor and wire
• 20 gauge wires
• Wire Length: 12”
Visit AxxessInterfaces.com for more detailed
information about the product and up-to-date
vehicle specific applications.
2
CONNECTIONS
CHRYSLER
200 2015-2017
Town & Country 2008-2020
DODGE
Dart 2013-2016
Durango 2014-2020
(Grand) Caravan 2008-2020
JEEP
Compass 2017-2021
Grand Cherokee (Base Amp) 2011-2013
Gray/Black To Right Instrument Panel Speaker -
White/Black To Left Instrument Panel Speaker -
Green To Left Rear Speaker/Tweeter +
Brown To Center Instrument Panel Speaker +
Gray To Right Instrument Panel Speaker +
White To Left Instrument Panel Speaker +
Green/Black To Left Rear Speaker/Tweeter -
Brown/Black To Center Instrument Panel Speaker -
White 22-Pin harness:
DODGE
Journey 2011-2020
Nitro 2007-2011
JEEP
Liberty 2008-2012
Wrangler JK 2007-2017
RAM
1500/2500/3500 2013-202
Gray/Black To Right Instrument Panel Speaker -
White/Black To Left Instrument Panel Speaker -
Green To Left Rear Speaker/Tweeter +
Brown To Subwoofer +
Gray To Right Instrument Panel Speaker +
White To Left Instrument Panel Speaker +
Green/Black To Left Rear Speaker/Tweeter -
Brown/Black To Subwoofer -
White 22-Pin harness:


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXABH-CH2

Behöver du hjälp?

Om du behöver hjälp med Axxess AXABH-CH2 ställ en fråga nedan och andra användare kommer att svara dig